Toshiba DP125F Drum Unit Replacement, Remove Developer Assembly With Drum Unit, Storage Notes

Drum Unit Replacement

Replacement Drum Kits include an Ozone Filter and Drum unit. Be sure to replace the Ozone Filter when replacing the Drum Unit.

Your TOSHIBA facsimile has been designed to display a two- stage alert to replace the Drum Unit once it has been depleted.

The first stage is a “DRUM UNIT WARNING” that alerts you that the Drum Unit is at or near its end of life and should be re- placed at your earliest convince. The unit will continue to receive and print facsimile messages during this stage.

The second stage is “REPLACE DRUM UNIT.” When this mes- sage is displayed, the machine can no longer print documents. Receptions will be stored in memory until the Drum Unit has been replaced.

For the purpose of determining Drum usage;

Each legal-size sheet of paper counts as 1.3 letter-size sheets of paper.

STORAGE NOTES:

The Drum Unit is a very im- portant part of this facsimile. Handle it with care as shown below.

Keep the Drum Unit within a temperature range of 0-35°C (32-95°F) and a humidity range of 20-80%RH (without condensation).

Do not store or use the Drum Unit in an environment where the temperature changes excessively.

Do not touch the light sensi- tive drum because its sur- face will be easily damaged.

Do not place the light sensi- tive drum in a location where it is exposed to direct sun- light or high intensity light (more than 200 lx) such as near a window.

1 Open the Top Cover

Top Cover

Release Lever

037

Grasp the Top Cover Release Lever and open the Top Cover.

Remove the

2 Developer Assembly

with Drum Unit

Developer

Assembly

051

Remove the Developer Assem- bly with the Drum Unit attached.

IMPORTANT:

•Never touch the photo- conductive drum (the green surface) of the Drum Unit. If the surface is scarred or scratched, it will cause print quality problems.

•Do not expose the photo- conductive drum of the Drum Unit to light for more than 3 minutes. If the Drum Unit is to be left anywhere outside the fac- simile, be certain to cover it with cloth, paper, etc.

3 Separate the Drum Unit

Drum Unit

	Developer
052	Assembly

Separate the Drum Unit from the Developer Assembly.

31