Toshiba DP125F, Dp120F manual Advanced Transmission Functions, Department Code Access

- ADVANCED TRANSMISSION FUNCTIONS

Department Code Access

This procedure assumes that you have selected and config- ured the Department Codes on pages 55 and 56 of this manual.

1 DEPT CODE Standby Menu

2 Enter the	3 Complete the
Department Code	Procedure

Once selected, the use of the facsimile is limited to authorized personnel only.

NOTE:

The usage for each depart- ment is recorded on the De- partment Control List (see page 217).

The Department Code Standby menu is shown below.

MAY-17-00 WED10:22

RESIDUAL MEMORY 80% ENTER DEPT CODE

Enter the 5-digit Department Code preset for your depart- ment.

ENTER DEPT CODE

*****

Then press:

NOTE:

If you do not have a valid Department Code Password, you cannot access this fac- simile.

Contact the key operator or supervisor for more informa- tion.

If the password you have en- tered is valid, the ordinary Standby Mode screen (as shown below) will be displayed. The access will be limited to one transmission job or one Op- eration Panel function (printing a list, accessing a Mailbox, etc.)

If the password does not match, verify your password and re-en- ter.

MAY-17-00 WED10:22

RESIDUAL MEMORY 100% LOAD DOCUMENT

NOTE:

Upon entering a valid 5-digit password, the standby prompt will remain on the LCD for one operation or one minute whichever oc- curs first.

163