248
SWITCH TEST

Select the SWITCH

TEST Menu
1
Press:
+
+
+
+
The switch test checks if the detection switches operate nor-
mally.
The test items in SWITCH TEST mode are as follows:
• Detection of Scanner Cover open/closed status
• Detection of Top Cover open/closed status
• Detection of Process Unit (Drum Unit with Developer Assem-
bly) presence/absence status
• Detection of Recording Paper and Recording Paper Tray pres-
ence/absence status
• Detection of Bypass Tray presence/absence status
• Detection of Flip Panels on the Operation Panel
NOTE:
If no operation is performed within 10 seconds after an opera-
tional instruction is displayed on the screen during the switch
test, the test result will be judged to be NG.
SWITCH TEST
OPEN SCANNER COVER

Check the Scanner

Cover
2
Open the Scanner Cover.
When its open state is de-
tected, the screen below ap-
pears. After checking that the
screen is displayed, close the
Scanner Cover.
Detects the open state
of the Scanner Cover.
SWITCH TEST
CLOSE SCANNER COVER
SWITCH TEST
OPEN THE TOP COVER
Close the cover

Check the Top Cover

3
Open the Top Cover. When its
open state is detected, the
screen below appears. After
checking that the screen is dis-
played, close the Top Cover.
Detects the open state
of the Top Cover.
SWITCH TEST
CLOSE THE TOP COVER
SWITCH TEST
PULL OUT THE UPPER
TRAY
Close the cover