Toshiba Dp120F, DP125F manual TTI Setting Recovery Transmission, Select the TTI Print Option, Time

TTI - continued

Setting Recovery Transmission

2 Select the TTI Print Option

Recovery Transmission allows the operator to re-transmit a document after failing the ini- tially specified number of redial attempts.

1 Display the

RECOVERY

TRANSMIT Menu

2 Select the Recovery	3 Enter the STORED
Transmit Option	TIME

Select the TTI Print option.

To select INSIDE, press:

To select OUTSIDE, press:

To select OFF, press:

The display shows the screen below to indicate that the menu selection is accepted. To return to the Standy Mode, press

.

OPERATION COMPLETED

If the Recovery Transmission is set to ON, the document is stored in memory for a specified length of time. You may retrans- mit the document during this time period without re-scanning the original document.

Press:

+

+

+

+

RECOVERY TRANSMIT 1.ON

2.OFF

Select the Recovery Transmit option.

To turn ON Recovery Transmis- sion, press:

Go to Step 3.

To turn OFF Recovery Trans- mission, press:

Skip the procedure in Step 3. Your setting is now complete. The facsimile will display the same screen shown in Step 3.

RECOVERY TRANSMIT

STORED TIME =(01-24) 06

Enter the stored time length (01 to 24, in unit of hours).

Then press:

When completed, the following screen is displayed. Press

to return to the Standby

Mode.

OPERATION COMPLETED

168