Toshiba Dp120F, DP125F manual TEL NUMBER=MAX.128

Abbreviated Dialer Registration - continued

6 Enter the Location ID Name

7 Enter the Telephone Number

8 Enter an Alternate Number (Optional)

Enter the Location ID name of the remote party to be assigned to the current Abbreviated Dial Number.

See page 36 for more informa- tion on Character Entry.

When the name is displayed correctly on the LCD display, press:

ABB. NBR= 001

TEL NUMBER=(MAX.128)

Enter the telephone number you want to store (up to 128 digits).

NOTE:

If your facsimile is connected to a PBX system, you may need to enter an access digit

(9)and a pause so the sys- tem will connect you to an outside line. In such cases,

press to enter a 3-sec-

ond pause. This pause may be repeated if necessary and may be entered anywhere between digits. A pause en- try is indicated as a hyphen “–” on the LCD display.

The telephone number is dis-

played on the bottom row of the LCD display as you enter it. Confirm that the number is cor- rect.

ABB. NBR = 001

TEL NUMBER=(MAX128) 9583359

Then press:

ABB. NBR=001

2nd TEL NBR=(MAX128)

Alternate Numbers are optional. If the remote location does not have two or more facsimile units in the same area, you can leave this entry blank. (See page 70 for more information.)

Enter the Alternate Facsimile Number.

Then press:

COMM. OPTION? 1.YES

2.NO

72