Enabling or Disabling Send After Scan Temporarily

With the Send After Scan Mode Default Setting set to “OFF”, this feature allows you enable the Send After Scan mode for a single transmission. Once that

1 Load the Document

2 Display the SEND

 

3 Select the Send After Scan Option

AFTER SCAN Menu

 

 

 

 

 

transmission is complete, the default status is regained.

With Send After Scan selected, every page of the doument will be scanned into memory before dialing will begin.

With Send After Scan set to NO (off), your DP120F/DP125F will begin dialing after the first page is scanned to memory.

Load the document face down in the Document Tray (see page 88).

Adjust the resolution and con- trast if desired (see page 89).

MAY-17-00 WED11:13

RESIDUAL MEMORY 100% ENTER TEL NUMBER

Turn the Flip Panels to the “50- 73” view to select the desired Function Key.

Press:

SEND AFTER SCAN 1.YES

2.NO

Select the desired Send After Scan Option.

To disable Send After Scan, press:

The following screen is dis- played. You may dial the remote facsimile for your communica- tion job. The display will return to the Standby Mode in about 60 seconds if no keys are pressed.

OPERATION COMPLETED

After 2 seconds:

RESIDUAL MEMORY 100% ENTER TEL NUMBER

Go to Step 5.

To enable Send After Scan, press:

WHEN MEMORY FULL

1.DELETE SCAN PAGES

2.SEND SCAN PAGES

Go to Step 4.

190

Page 192
Image 192
Toshiba Dp120F, DP125F manual Enabling or Disabling Send After Scan Temporarily