Toshiba DP125F, Dp120F manual Scan Resolution Setting, Standard, Fine Halftone

Scan Resolution Setting

The scan resolution can be set to one of the following five modes based on the type of im- age you are scanning.

The scan resolution is normally set to the default setting. When you change the resolution, the facsimile will return to the de- fault setting after each transac- tion. To change the default reso- lution setting, see page 64.

STANDARD

For sending normal text and graphics.

FINE

For sending normal text and graphics with extra clarity.

U-FINE(Ultra-Fine)

For sending fine text and graphics with extra clarity.

FINE HALFTONE

For detailed photos or docu- ments with colors or shading.

U-FINE HALFTONE

(Ultra-Fine Halftone)

For very detailed photos or documents with colors or shading.

Press until the required resolution mode is indicated by the appropriate LED.

The mode changes as follows:		: illuminated
		( : extinguished	)
FINE
U-FINE	Standard Mode (when all the lamps are extinguished)
HALFTONE

FINE
U-FINE	Fine Mode
HALFTONE
FINE
	Ultra-Fine Mode
U-FINE
HALFTONE		Each corresponding
		lamp is illuminated.
FINE
U-FINE	Fine Halftone Mode
HALFTONE
FINE
	Ultra-Fine Halftone Mode
U-FINE
HALFTONE

*When Ultra-Fine is selected, the DF120F/DP125F will scan all documents at 406 dots/inch horizontal x 391 lines/inch vertical. Depending on the capabilities of the remote facsimile receiving this document, the document may be transmitted by the DF120F/ DP125F at Ultra-Fine resolution (406 dots/inch horizontal x 391 lines/inche vertical) or it may be transmitted at Super Fine (203 dots/inch horizontal x 391 lines/inch vertical).

89