Toshiba Dp120F, DP125F manual Features

FEATURES

Super G3 High-speed Communications

Provides state-of-the-art V.34 modem technology for worldwide compatibility at speeds up to 33,600 bits per second.

High Resolution, 256 Level Halftone

With a maximum resolution of 16 dots/mm x 15.4 lines/mm (406 DPI x 391 LPI) and 256 level halftone, precision drawings, small-size characters, photographs, etc. are copied, sent, and received with exceptional clarity.

Open Network Mailbox Systems

Your new TOSHIBA provides ITU-T F-code communication for Open Mailbox op- eration.

Hyper Scan Document Scanning

Allows letter sized originals to be scanned into memory in as little as 1.2 seconds per page.

73 Programmable One Touch Autodialer Keys

Allows remote locations to be quickly dialed at the touch of a key saving time and eliminating mis-dialed phone numbers.

300 Abbreviated Autodial Locations

In addition to the 73 One Touch Autodialer Keys, 300 abbreviated locations can also be programmed with other frequently called locations. These locations can then be easily accessed using abbreviated codes ranging from 001 to 999.

22 Function Keys

Twenty two frequently used functions are assigned to the keys located on the One Touch Index Panel. These keys allow direct access to frequently used function settings and operations.

Multi-address (Broadcast Transmission)

This feature allows the transmission of a document to multiple remote units with one operation sequence. Locations may be selected using the autodialer or infre- quently dialed locations that have not been preregistered.

Multi-Memory Access Operation

Allows up to 5 operations such as transmission or reception on either line 1 or line 2 (if so equipped), printing, scanning, and programming to be performed at the same time.

Super Power Saver Mode

Reduces power consumption to approx. 2W by turning all unnecessary functions off in the standby mode.

Substitute Memory Reception

When the recording paper or supplies have been depleted or in the event of a recording paper jam, your receptions will be safely stored in memory until the problem is corrected.

Memory Release

Minimizes the potential for memory overflows when connected with a remote loca- tion. After each page has been successfully transmitted it is released from memory to make room for subsequent pages.

TOSHIBA Viewer

Installing the TOSHIBA Viewer software that comes with the machine enables following functions (see page 255).

•600 dpi plain paper laser printer

PC print jobs are printed on plain paper at a crisp 600 dpi print resolution.

•Setting and programming the machine from a PC You can set up and program the machine from a PC.

•PC Scanner function

The machine can be used as a Twain compatible B/W image scanner (16 dots/ mm x 15.4 dots/mm max.).

User Test Mode

The user test mode can help you to find the cause of a machine problem should a failure occur.

PCL Printing (Option)

By installing the optional PCL Print Kit (GA-1020), the machine can be used as a PCL printer. Adding the optional NIC Kit (GF-1010) enables to use the machine as a network PCL printer.

Internet Fax Function (Option)

You can send a facsimile message via the internet by having the optional Internet Fax Kit (GD-1040) and NIC Kit (GF-1010) installed in the machine.

8