Toshiba DP125F, Dp120F manual Device Configuration, Configuration Summary

- DEVICE CONFIGURATION

Configuration Summary

This facsimile has many user adjustable settings.

1 Enter the Configuration Menu

2 Select the Desired Configuration Setting (01-16)

Each of these configuration set- tings is discussed in detail throughout the remainder of this section.

Use the following procedures to access one or more of these configuration settings.

Press . The initial Menu Screen displays.

1.COMM. OPTIONS

2.LISTS

3.INITIAL SETUP 4.DEFAULT SETTINGS ↓

Press to enter DEFAULT

SETTING. The Default Setting sub-menu displays.

1.MACHINE SETTINGS

2.TX SETTINGS

3.RX SETTINGS 4.REPORTS & LIST ↓

Press to enter MACHINE

SETTINGS. The Machine Set- tings sub-menu will now dis- plays.

01.SPEAKER VOLUME

02.POWER SAVER 03.SEPARATOR PAGE 04.DEPARTMENT CODE ↓

05.ACCOUNT CODE 06.PRINT DENSITY 07.DOCUMENT LENGTH 08.LINE MONITOR 09.RECEIVE INTERVAL 10.ECM 11.DOCUMENT MODE 12.COLLATE COPY 13.LETTER HEAD PAPER 14.REDIAL MODE 15.AUTO RECEIVE MODE 16.LINE-2 MODE

Press or until the desired Configuration Setting is

highlighted or enter the desired Configuration Setting 01 through 16 from the list below. The detailed configuration procedure for each setting is shown in parentheses after the configuration setting.

01.SPEAKER VOLUME - (Page 47) - Sets the Bell Ring, Alarm Tone, Key Touch Tone and Monitor volume (0-7) (4*) for the machine.

02.POWER SAVER - (Page 51) - Configures the machine’s Super Power Saver function for Automatic/Manual* or Off operation.

03.SEPARATOR PAGE - (Page 53) - Enables or Disables* a FAX Separator Page, Copy Separator Page, and PC Separator Page.

04.DEPARTMENT CODE - (Page 55) - Enables, Disables* and Configures up to 99 Department Codes.

05.ACCOUNT CODE - (Page 58) - Enables or Disables* a 4-digit Account Code entry.

06.PRINT DENSITY - (Page 59) - Sets the Print Density (-2-+2) (0*) for the machine.

NOTE: Only 4 selections can be displayed at one time.

07.DOCUMENT LENGTH - (Page 60) - Enables* or Disables the sending of documents longer than 1 Meter (39.4").

08.LINE MONITOR - (Page 61) - Enables or Disables* the Line Monitor function.

09.RECEIVE INTERVAL - (Page 62) - Sets the interval (0-15 min.) the machine will wait after making four consecutive dialings.

NOTE: * indicates the factory default setting.

10. ECM - (Page 63) - Enables or Disables* the ECM function.

45