Fisher DIMENSIONAL DRAWINGS Transmitter, Model 244ER, Model 244EH, Threaded-Sensor Universal

DIMENSIONAL DRAWINGS

Transmitter

Model 244ER Model 244EH

Shown with Standard Compression Screw Terminals

			60 (2.4)
		Sensor Terminals	33 (1.3)
			WAGO® Spring
			Clamp Sensor
			Terminals
			Communication	24 (1.0)
			Terminals	Failure Mode Switch	1360B02A
			Power Terminals
		Power Terminals
			33 (1.30)
					644-
			Shown with WAGO® Spring Clamp Terminals
			60 (2.4)
82		1101A01A	33 (1.3)
			Standard Sensor
(3.2)
			Terminals
			Communication	24 (1.0)
		104
			Terminals	Failure Mode
		(4.1)
				Switch
	36	1105E01A.644-	Power		1360A02A644-
	(1.4)		Terminals	34 (1.33)

Dimensions are in millimeters (inches)

Enclosure and Model 244EC Configuration Interface

Threaded-Sensor Universal	Integral DIN Style Sensor		Model 244EC
Head (option code J5 or J6)(1)	Connection Head(2)	Configuration Interface
112 (4.41)			0.61 m (2 ft)
96 (3.76)
			Configuration Leads
Label	104 (4.09)
95 (3.74)		114 (4.5)
	78 (3.06)	84 (3.3)	38 (1.5)
75 (2.93)	100 (3.93)
SST “U” Bolt			1.83 m (6 ft) Ribbon Cable
Mounting,
2-inch Pipe

Dimensions are in millimeters (inches)

644-4420A02A, 4410AO1A, 3300A01A

(1)A “U” Bolt is shipped with each universal head unless assembly option code X1, X2, or X3 is ordered. However, since the head can be integrally mounted to the sensor, it may not need to be used.

(2)Note: The DIN Style Integral sensor connection head is only available through Volume 2 of the sensors product data sheet.

A-9