Toshiba DP125F, Dp120F manual ECM Default Setting

ECM Default Setting

ECM (Error Correction Mode) is an internationally-recognized er- ror correction system. It enables error free communications by automatically re-sending any

1 Display the SET

ECM Menu

2 Select the ECM	3 Select Another
Option	SETUP Item, or ...

portion of the document affected by phone line noise or distor- tion.

NOTES:

•Default ECM setting is ON.

•Both the sender and the receiver must have the ECM feature to perform ECM communications.

•This setting cannot be changed if a document is stored in memory. Re- sidual memory must be 100%.

•ECM is required for Su- per G3 (33,600 bps) op- erations. If ECM is dis- abled, Super G3 opera- tions are, also, disabled.

Press:

+

+

+

+

SET ECM

1.ON

2.OFF

Select the desired ECM option. The LCD screen shown below is displayed for 2 seconds.

To turn ECM to ON, press:

To turn ECM to OFF, press:

OPERATION COMPLETED

Displayed for 2 seconds

Returns to display the SETUP menu screen.

After completing this Configura- tion Setting, you may continue to select other settings referring to their associated pages for in- structions, or press

to exit the Configuration Setting mode and return to the Standby Mode.

63