Toshiba DP125F, Dp120F manual Continuous Polling, Interval Stop Time

Continuous Polling

Use this procedure to poll the same remote facsimile(s) on a regular schedule. Continuous Polling operations can be pro- grammed for specific time inter-

1 Display the	2 Select PROG. CONT.	3 Enter the Polling	4 Enter the Start and
POLLING Menu	POLL.	Interval	Stop Time

vals on the days selected. In ad- dition, a 4-digit security code can be used with other TOSHI- BA facsimiles when the docu- ment has a security code pro- grammed.

NOTES:

• Calls are performed within the set time period on the days selected with the set interval between callings.

•If multiple sending sta- tions are programmed, callings are performed to all those stations within the set time period.

•If the polling operation exceeds the set time pe- riod, it will continue until all the facsimiles have been polled.

•Redialing or calling to al- ternate dialing numbers is not available during this operation.

•If a power failure occurs during this procedure, the polling continues when power is restored.

•If the set time period is shorter than the set call- ing interval, polling will be performed only once at the start time.

Turn the Flip Panel to the “50-		Select “3.PROG. CONT. POLL”		Enter the time interval between
73” view to select the desired		by pressing:		polling sequences (10 to 70
Function Key.				minutes).
Press:				Only interval settings of 10-
				minute increments are permis-
				sible. (Example: Enter “1” for
				10 minutes or “2” for 20 min-
	POLLING	PROG. CONT. POLL.		utes, etc.)
	1.POLLING
	2.POLLING RESERVE	INTERVAL=(10-70)MIN
	3.PROG. CONT. POLL.
			0

Then press:

PROG. CONT. POLL.

TIME PERIOD = 08:00 -17:00

Enter the polling start and stop time.

When the time period is dis- played correctly, press:

NOTES:

•You may use /

to move the cursor left and right.

•If the 12-hour format is selected, you may use

the / keys to select AM or PM.

PROG. CONT. POLL. [↑↓ ] FOR SETTING SCHEDULE =

MON-FRI

145