Toshiba Dp120F, DP125F manual Initial Printing Supplies Installation, Recording Paper Installation

- INITIAL PRINTING SUPPLIES INSTALLATION

Recording Paper Installation

About Recording Paper:

• Use only recommended paper

brands to optimize your fac-

simile performance. Contact

1 Pull Out the Paper Tray

2 Attach the Recording	3 Press Down the	4 Prepare the
Paper Size Label	Paper Pressure Plate	Recording Paper

your	authorized	TOSHIBA
dealer for more information.
• Remove the recording paper
when	storing or	relocating
your facsimile.
• Avoid using damaged, folded
or misaligned recording paper.
Use of damaged paper could
cause double feeding or paper
jams.
• Use of damp recording paper
will cause poor printing over
all or part of the image area. If
the paper is excessively moist,
print quality may become un-
even and voiding may occur.
Replace the paper, should this
condition exist.

029

Pull the paper tray out using the handle located at the front of the tray.

Pull the tray straight out toward you as illustrated above.

CAUTION:

•Never place heavy objects on an open tray, nor apply a strong force.

Recording Paper

Size Label

030

If not already at the correct pa- per size, insert the Paper Size Label into the slot of the Paper Tray.

See page 22 for information on changing the recording paper size.

	Paper
032	Pressure Plate

Press the Paper Pressure Plate down until it clicks.

031

Prepare new recording paper sheets by holding both ends and flexing several times.

This will separate the sheets and provide optimum feeding.

Align the stack so that all four corners are neatly aligned.

Be sure to load the recording paper in accordance with any paper manufacturer’s printing side instruction. Some papers have a preferred image side. This image side should be placed face down in the paper tray.

20