Toshiba DP125F, Dp120F manual Line Selection

Line Selection

This option allows you to select the phone line to be used for a transmission if this facsimile is equipped with the 2nd Line Board.

1 Load the Document

2 Display the TEL	3 Select the Desired
LINE SELECT Menu	Option

4 Enter the Facsimile Number

You can activate this option when programming an Abbrevi- ated Dial Number (see page 70) or One Touch Dial Key (see page 77) if the communication with a certain remote party al- ways requires this option.

NOTE:

Line 2 is available for trans- mission if Line 2 has been set for Transmission/Recep- tion (see page 69). In addi- tion, if Line 2 is set for recep- tion only with timer, trans- missions are only possible when the timer has expired.

Load the document face down in the Document Tray (see page 88).

Adjust the resolution and con- trast if desired (see page 89).

APR-15-00 SAT11:13

RESIDUAL MEMORY 100% ENTER TEL NUMBER

Turn the Flip Panel to the “50- 73” view to select the desired Function Key.

Press:

NOTE:

If no Line 2 Board is in- stalled, an error prompt will result from this application.

TEL LINE SELECT

1.FIRST AVAILABLE

2.LINE #1 3.LINE #2

Select the desired option.

To not select a specific line, press:

To select Line 1, press:

To select Line 2, press:

COMM. RESERVATION

RESIDUAL MEMORY 80% ENTER TEL NUMBER

Enter the number of the remote facsimile using any of the fol- lowing dialing methods or you may designate another option at this point.

•One Touch Key Dialing

... See page 97

•Alphabet Dialing

... See page 98

•Abbreviated Dialing

... See page 99

•Keypad Dialing

... See page 100

189