Toshiba Dp120F, DP125F manual 10a Enter the Number Using the Dial Keypad

Setting Up a Relay Box - continued

8 Enter the End Station - continued	9 Complete the End
	Station Entry

10 Enter the Number to send the Transmission Result

8c	Enter the Group	8d Cancel or Retain the
	Number of End Station	Existing Station
	- continued

When all the desired End Sta- tion Entries (One Touch Keys, Abbreviated Dial Numbers or Group Numbers) are completed under the same Relay Box,

Enter the facsimile number you want the relay transmission re- port (relay transmission End Stations results) sent to.

10a Enter the Number Using the Dial Keypad

Then press:

RELAY END NUMBER

GROUP NUMBER= XXXX XXXXXXXX

After 2 seconds:

RELAY END NUMBER GROUP NUMBER= XXXX ENTER MORE OR PRESS [START]

Go to Step 8.

If the End Station (One Touch Key, Abbreviated Dial Number or Groups Number) designated in Step 8a, 8b or 8c have al- ready been entered under the same Relay Box, the following LCD prompt is displayed.

RELAY END NUMBER ALREADY ASSIGNED 1.CANCEL 2.RETAIN

To cancel the existing End Sta- tion (One Touch Key, Abbrevi- ated Dial Number or Group Number), press:

To retain the existing End Sta- tion (One Touch Key, Abbrevi- ated Dial Number or Group Number), press:

Go to Step 8.

press:

TRANSMISSION REPORT ENTER TEL NUMBER, SPEED DIAL KEY OR OT ENTER TO COMPLETE

If you do not desire a relay transmission report, press

.

The following screen is dis- played for about 2 seconds to indicate that the Mailbox is reg- istered.

REGISTERED

Enter the facsimile number us- ing the Dial Keypad.

TRANSMISSION REPORT

TEL NUMBER =(MAX128)

XXXX

Then press:

The following screen is dis- played for about 2 seconds to indicate that the Mailbox is reg- istered.

REGISTERED

130