Toshiba DP125F, Dp120F manual Enter the Alternate Number Optional

One Touch Dialer Registration - continued

7 Enter the Telephone Number

8 Enter the Alternate Number (Optional)

9 Select Communication Options (Advanced Setup)

Enter the telephone number you want to store (up to 128 digits).

NOTE:

If your facsimile is connected to a PBX system, you may need to enter an access digit

(9)and pause so the system will connect you to an out- side line. In such cases,

press to enter a 3-sec-

ond pause. This pause may be repeated if necessary and may be entered anywhere between digits. A pause en- try is indicated as a hyphen “–” on the LCD display.

Check the entered telephone

number on the bottom row of the LCD display. If it is correct, press:

ONE TOUCH= 03

2nd TEL NBR=(MAX128)

Alternate Numbers are optional. If the remote location does not have two or more facsimiles in the same area, you can leave this entry blank. (See page 77 for more information.)

Enter the Alternate Facsimile Number:

Then press:

COMM. OPTION?

1.YES

2.NO

This setting will allow you to specify one or more of the fol- lowing Communication Options for the One Touch key you are registering.

Delayed Communication Default=off

Select to program a trans- mission start time.

Transmission Report

Default=off

Enables or disables the printing of a TX Report.

Line Monitor

Default=off

Enables or disables the line monitor speaker during dial- ing.

Quality TX

Default=off

Selects a lower modem speed for poor communica- tion links.

Sub Address

Default=none

Specifies a Sub Address for the One Touch key being registered. The remote unit must support Sub-Address capabilities.

Tel Line Select Default=first available Specifies which tel line is se- lected when the 2nd Line is installed.

9a Select the Communication Option

To select the most popular set- tings, skip this step (recom- mended) and return to Step 3 by pressing:

To specify the Communication Options, press:

When “1.YES” is selected, the COMM. OPTIONS screen ap- pears. Follow the next steps for each item selection.

COMM. OPTIONS

1.COMPLETE

2.DELAYED COMM. 3.TX REPORT

4.LINE MONITOR 5.QUALITY TX 6.SUB ADDRESS 7.TEL LINE SELECT

These items are outside the LCD frame. To view them, use the [ ] scroll key.

79