Toshiba DP125F, Dp120F manual Line-2 Operation

Line-2 Operation

If your facsimile is equipped with the Line-2 Board, you can configure its operation as fol- lows.

1 Display the LINE-2 MODE Menu

2 Configure Line-2	3 Enter the Start Time	4 Select Another
Operation	and End Time	SETUP Item, or ...

Press:

+

+

+

+

LINE-2 MODE

1.TX & RX

2.RECEPTION ONLY 3.TIMER

Select “1.TX/RX” if the second line is used for both transmis- sion and reception by pressing:

(Default)

Select “2.RECEPTION ONLY” if the second line option is used for reception only by pressing:

Select “3.TIMER” if the second line option is used for reception only during a specific time range set in Step 3.

When either 1 or 2 is selected, the “OPERATION COMPLET- ED” message is displayed. Con- tinue to the final step.

When 3 is selected, the follow- ing screen is displayed to set the time period for reception. If any data is already set, it is dis- played on the bottom row.

RECEPTION ONLY

TIME PERIOD =

00:00 -00:00

Enter the start time and end time of the time period in which the Line-2 will be used for re- ception only.

NOTES:

For 24-hour format: 00:00 to 23:59

For 12-hour format:

12:00 to 11:59, and the AM or PM designation

When the correct time period is entered, press:

OPERATION COMPLETED

Displayed for 2 seconds

Returns to display the SETUP menu screen.

After completing this Configura- tion Setting, you may continue to select other settings referring to their associated pages for in- structions, or press

to exit the Configuration Setting mode and return to the Standby Mode.

69