Toshiba Dp120F, DP125F manual Relay Transmission, Relay-Relay Transmission Overview

- RELAY TRANSMISSION

Relay Transmission, Relay-Relay Transmission Overview

What is a “Relay Transmission”?

A relay transmission is used to send documents from your facsimile (originator) to a Hub Station, which then sends them to additional end stations. If you have several stations in one or more regional areas (e.g. Los Angeles Metro, New York City, Dallas-Ft. Worth, Seattle-Tacoma, etc.); you can save time and phone charges by setting up a relay system. By sending your document to a Hub Station, you can then instruct the Hub Station to retransmit the document to the end stations in their local geographical area.

To perform Relay Transmissions or Relay-Relay Transmissions, you must build a network beforehand.

Consult your authorized TOSHIBA dealer for assistance in using this function.

Conditions for a Relay/Relay-Relay Transmission Network

1.	The sending station must be a TOSHIBA DP120F/DP125F/DP80F/DP85F fac-
	simile or another ITU-T relay communication compatible facsimile unit.
2.	The Hub Station must be a TOSHIBA DP120F/DP125F facsimile or another

Originator Hub

Station Station

End Station Group (stations to finally re- ceive the document)

End Station

	ITU-T relay communication compatible facsimile unit with the Hub Station func-
	tions.
3.	The relay station must program the end station telephone numbers to Abbrevi-
	ated Dial numbers or One Touch keys or Group numbers. Up to 50 abbreviated
	dial numbers or one touch keys or groups can be programmed. For information
	on setting Relay Box, see page 127.
4.	Due to advanced planning and setup requirements for the Relay-Relay trans-
	missions involving two or more Hub Stations transfers, contact your authorized
	TOSHIBA dealer for detailed instructions.

What is a “Relay-Relay Transmission”?

A Relay Transmission where two levels of Hub Stations are involved is called a Relay-Relay Transmission. In a Relay-Relay Transmission, the first Hub Station sends the document to another Hub Station(s) which then transmits them to additional end stations.

How to Setup a Relay Transmission:

• Hub Station

Create a Relay Box within a hub unit (like the DP120F/DP125F) by following the

procedures beginning on page 127.

Second

Hub Station

Originator Hub

Station Station

Second

Hub Station

End Station Group (stations to finally re- ceive the document)

End Station

End Station

End Station

NOTE: A Relay Box must be established for every possible unit if you wish to obtain a result report after the relay is completed.

•Originator

Transmit a document to the hub unit from an ITU-T relay compatible remote facsimile (like the DP120F/DP125F) with the procedures beginning on page 134.

126