Toshiba Dp120F, DP125F manual Change the Device settings, 3a Edit the device configuration

Browse Folders - continued

Changing the Device Configuration - continued

3 Change the Device settings

You can remotely configure the device settings using the TOSHIBA Viewer.

After clicking Setup... on the Device Tab screen, the TOSHIBA Viewer retrieves the device settings from the DP120F/DP125F.

When you want to change the device settings file directly, go to Step 3a.

When you want to change the device settings file by copying the settings from a set file lo- cated on your hard disk, go to Step 3b.

When you want to change the device settings file by copying the settings from a user set-

tings file stored within TOSHIBA Viewer, go to Step 3c.

For additional information on a specific item, refer to Help and the appropriate section of the

DP120F/DP125F Operator's Manual.

3a Edit the device configuration

Select or enter the value for items that you want to change the configurations.

Click the ü button to download the new settings to your DP120F/ DP125F. Back to Step 2a.

NOTE:

Click the ✘ button to cancel adding/editing the device configu- ration. Back to Step 2a.

3b Load a set file on your hard disk

Double-click on Add settings file.

A “New settings” file is created.

Right-click on the new settings file and select Load....

NOTE:

In order to create a user settings file to be saved on your hard disk, refer to the section “Saving the Device Configuration”.

The Load settings screen appears. Designate the hard disk location of the desired set file, select the file, then click on Open. The set file is loaded.

Continue to Step 3c.

272