Toshiba Dp120F, DP125F manual Abbreviated Dialing

Abbreviated Dialing

Once an Abbreviated Dial Num- ber is programmed with a valid remote facsimile location, that location can be accessed by re- calling the corresponding Abbre-

1 Press the SPEED DIAL Key

2 Enter the	3 Press the START Key Tray
Abbreviated Number

viated Dial Number.

The document must be loaded and the resolution and contrast set before a transmission using Abbreviated Dialing (see page 89).

Press:

+

ABB. NUMBER =(1-999)

Enter the Abbreviated Dial Number (1 to 999) assigned to the desired party.

NOTE:

When an incorrect number is

entered, use to delete

preceding digits, or press

once to start over

from the beginning.

Example of Abbreviated Dial Number, 10:

COMM. RESERVATION

ABB. NUMBER =(1-999) 10

When the correct number is dis- played, press:

The One Touch key or Abbrevi- ated Dial Number and the name of the party will appear on the LCD display for about 2 sec- onds.

Your facsimile will automatically start scanning the document into memory (if enabled). While scanning, the facsimile dials, connects, and starts the trans- mission.

ABB. NBR=	10
LONDON OFFICE

Displayed for 2 second

SCANNING TO MEMORY

FILE NBR = 091

RESIDUAL MEMORY 99%

During scan to memory

MAY-17-00 WED11:49

RESIDUAL MEMORY 99%

During transmission

NOTE:

When the number entered (within the range of 1 through

999)is not preprogrammed with a specific party’s fac- simile or telephone number, the message “NUMBER NOT LISTED” is displayed for 2 seconds and then the fac- simile returns to the screen in Step 1.

ABB. NBR= 10

NUMBER NOT LISTED

Displayed for 2 seconds

98