Toshiba DP125F manual Recording Paper Size Reception Reduction Setting, Select the Desired Option

Recording Paper Size

Reception Reduction Setting

This facsimile can use Letter and Legal size paper. The received document is recorded (printed) within the Effective Recording Area of the paper.

This function allows the reduc- tion of the received image, if the received document is larger than the recording pa-

1 Display the SET RX REDUCTION Menu

2 Select the Desired Option

Effective

Recording

Area

B

A

		Paper Size	A	B	C	D
C	D	Letter: mm	216	210	271	279
		inches	8.5	8.3	10.6	11.0
		Legal: mm	216	210	348	356
		inches	8.5	8.3	13.7	14.0

per.

Press:

+

+

Select the desired option.

To set RX Reduction to ON, press:

NOTES:

•If the received document is equal to or shorter than the re- cording area of the paper, the received document is printed at its actual size.

•If the received document is larger than the recording area of the paper, it will be vertically reduced to fit on the recording paper installed. The reception will be divided onto two sheets if the document needs to be reduced to smaller than 73% of its original size.

Document Recording Paper

•If you desire to receive large originals without reduction or excessive paper usage, set the ”DISCARD” function to “ON.” If the lower part of the original exceeds the recording paper by 13 mm or less, the image will be automatically discarded. This predetermined dimension is a service function setting. Contact your Toshiba dealer for the setup.

•If the “RX REDUCTION” function is “OFF”, the larger original will be recorded on two or more sheets. The top of the sec- ond page will repeat about 5mm of the lower part of the first page.

+

+

RX REDUCTION

1.ON

2.OFF

To set RX Reduction to OFF, press:

OPERATION COMPLETED

113