Developer Assembly and Drum Unit Installation

1 Open the Top Cover

2 Shake the Developer Assembly

3 Remove the Protective Strip

Attach the Drum Unit

4 to the Developer Assembly

5 Install the Developer

Assembly with Drum

Unit

Top Cover

Release Lever

037

Grasp the Top Cover Release Lever to open the Top Cover.

 

Developer

040

Assembly

Hold the Developer Assembly with both hands and shake the cartridge back and forth several times.

Developer

Assembly

Strip

041

Holding the Developer Assem- bly with one hand, grasp the end of the protective strip under the Toner Cartridge. Pull the strip firmly to completely remove it from the Toner Cartridge.

The sealing film will contain a small amount of toner on its surface.

Carefully dispose of the film in an appropriate waste re- ceptacle to avoid soiling items it may come in contact with.

 

Drum Unit

 

Developer

042

Assembly

Attach the Drum Unit to the De- veloper Assembly. Position the Drum Unit with the green Drum surface facing the Toner Roller on the Developer Assembly.

IMPORTANT:

Never touch the photo- conductive drum (the green surface) of the Drum Unit. If the surface is scarred or scratched, it will cause print quality problems.

Do not expose the photo- conductive drum of the Drum Unit to light for more than 3 minutes. If the Drum Unit is to be left anywhere outside the fac- simile, be certain to cover it with cloth, paper, etc.

Developer

Assembly

043

Install the Developer Assembly (with Drum Unit attached) into the machine.

Holding the Developer Assem- bly by the green handles, align the three shafts on the Devel- oper Assembly sides with the slots in the machine frame.

25

Page 27
Image 27
Toshiba DP125F, Dp120F manual Developer Assembly and Drum Unit Installation, Install the Developer Assembly with Drum Unit