Toshiba DP125F, Dp120F manual Check LINE-2 Display only when Line-2 is installed

Error Messages - continued

Error Message

LOWER PAPER EMPTY

PAPER EMPTY

TONER LOW

TONER EMPTY

DRUM UNIT WARNING

REPLACE DRUM UNIT

CONFIRM DEV. UNIT

CHECK LINE-1

Cause / Solution

No paper exists in the lower paper tray. This error occurs with an optional paper tray in- stalled.

Supply recording paper to the lower paper tray.

No recording paper exists in any paper tray.

Supply recording paper to the paper tray(s).

The toner is nearly exhausted (warning).

Replace the toner.

The toner is exhausted.

Replace the toner (see page 28).

The drum unit is approaching the end of its life (warning).

Replace the drum unit (see page 31).

The drum unit has reached the end of its life.

Replace the drum unit (see page 31).

No developer assembly exists.

Install a developer assembly.

Line-1 is not connected to the telephone line.

Correctly connect a modular phone cord be- tween the telephone line jack and the LINE1 connector on the right side of the machine (see page 18).

Error Message

CHECK LINE-2 (Display only when Line-2 is installed)

NETWORK ERROR

NETWORK DISABLED

PCL DISABLED

DEVICE ERROR XX

Cause / Solution

Line-2 is not connected to the telephone line.

Correctly connect a modular phone cord be- tween the telephone line jack and the LINE2 connector on the right side of the machine (see page 18).

With the Optional NIC board installed, a net- work connection is not detected.

Insure you have a proper network connection. If the same error message is displayed again, call your service representative.

Optional NIC board is out of order. Network related features do not work.

Power your machine off, then back on. If the error condition is cleared, confirm normal op- eration. If the error condition returns, call your service representative.

Optional PCL board is out of order. PCL print- ing do not work.

Power your machine off, then back on. If the error condition is cleared, confirm normal op- eration. If the error condition returns, call your service representative.

The machine system is out of order.

Power your machine off, then back on. If the error condition is cleared, confirm normal oper- ation. If the error condition returns, call your service representative.

227