Toshiba DP125F, Dp120F manual Manual Redialing Jobs in Memory

Redialing - continued

Manual Redialing Jobs in Memory

This function enables you to transmit a document after select- ing it from the jobs reserved in memory waiting to be redialed.

1 Press the REDIAL Key

2 Select the Job to be Redialed

3 Start Redialing

NOTE:

If you are using Department Codes, the initiating Depart- ment Code must match for this operation to work.

Press:

REDIAL [ENTER]:START

[↑ ]:PREVIOUS SCREEN [↓ ]:NEXT SCREEN

•If there are no jobs to be redialed, the screen below is displayed for 2 seconds, then the facsimile returns to the Standby Mode.

REDIAL

NUMBER NOT LISTED

Wait 5 seconds or press any key on the Operation Panel ex-

cept to display the

screen on the right.

Screen Index:

1st line	...	Type of job
2nd line	...	Destination of
		redialing
3rd line	... Date & Time of
		job accepted
4th line	... File Number

Locate the screen of the desired job using the following scroll keys.

SINGLE TRANSMIT L.A. OFFICE MAY-17-00 13:53 FILE NBR =121

SINGLE TRANSMIT SEATTLE FACTORY MAY-17-00 13:56 FILE NBR =123

SINGLE TRANSMIT L.A. OFFICE MAY-17-00 14:03 FILE NBR =124

When the desired job is dis- played, press:

The facsimile starts to dial the number for a transmission.

MAY-17-00 WED14:05

RESIDUAL MEMORY 75%

(for the previous screen)

(for the next screen)

111