Toshiba Dp120F, DP125F manual Dial Type Setting

Dial Type Setting

There are two types of dialing modes: DP [Dial Pulse (Rotary)] and MF [Multifrequency (touch tone)]. If your telephone emits tones when you are dialing, this

1 Display the DIAL	2 Select Your Dial	3 Enter the Access
TYPE Menu	Type	Digits

4 Select Another

SETUP Item, or ...

usually indicates that you have a MF type line and no adjust- ment is required. Otherwise, you will have to select the appropri- ate setting.

To display the SETUP menu, press:

+

1.LANGUAGE

2.DATE & TIME 3.TERMINAL ID 4.DIAL TYPE

NOTE: Only 4 selections can be displayed at one time.

Highlight

4.DIAL TYPE

using or and press:

or

DIAL TYPE

1.MF

2.DP

Select your dial line type.

(for Multi-Frequency type)

default

(for Dial Pulse type)

If the Line-2 board has been in- stalled, repeat Step 2 for the 2nd line.

DIAL TYPE	LINE-2
1.MF
2.DP

After selecting the dial type, the following will be displayed.

DELETE ACCESS DIGIT

ACCESS DIGIT=(MAX10)

Access digits are numbers which are required by PBX sys- tems to access the phone sys- tem “outside” the PBX. A com- mon access digit is “9.”

Access Digits are PBX digits such as 9, pause, and 1 which need to be omitted when using chain dialing.

If you do not require the use of a credit card when chain dialing,

press to skip this step.

Otherwise, enter the number (max. 10 digits) from the Dial Keypad.

When the correct Access Digit is displayed, press:

OPERATION COMPLETED

Displayed for 2 seconds

Returns to display the SETUP menu screen.

After completing this Configura- tion Setting, you may continue to select other settings referring to their associated pages for in- structions, or press

to exit the Configuration Setting mode and return to the Standby Mode.

44