Toshiba Dp120F, DP125F manual Secure Reception Access Code Setting, Existing Code Security Code

Secure Reception Access Code Setting

There are occasions when you may wish to secure access to incoming documents. Secure RX allows you to receive docu- ments to memory until a security

1 Display the SECURE RX Menu

2 Select the Option	3 Determine New or	4 Enter the Current
	Existing Code	Security Code

code is entered. This ensures that only users with the correct security code may retrieve documents. In addition, the Se- cure RX can be setup to auto- matically be activated during a specified time period.

To setup Secure RX, a 4-digit security code must be pro- grammed first. After program- ming the security code, you can specify the time period during which the Secure RX will be ac- tive. 24-hour coverage for spe- cific days of the week is select- able. This section describes the procedure for programming a security code or changing an existing security code.

Press:

+

+

+

+

SECURE RX

01.SECURITY CODE

02.ACTIVITY MODE

To select a security code for the first time or to change an exist- ing security code, press:

+

If the security code already ex- ists and you wish to change the current code, go to Step 4.

When you enter a security code for the first time, go to Step 5.

If a new code needs to be en- tered:

If the code already exists:

SECURITY CODE ENTRY

NEW CODE

SECURITY CODE=

SECURITY CODE ENTRY

CURRENT CODE

SECURITY CODE=

Before you change the security code, you must enter the exist- ing code to gain the access. Enter the current security code.

Then press:

Go to Step 5.

If the correct code is entered, following is displayed.

SECURITY CODE ENTRY NEW CODE SECURITY CODE=

XXXX

176