Toshiba DP125F manual Select Communication Options Advanced Setup, Transmission Report Default=off

Abbreviated Dialer Registration - continued

9 Select Communication Options (Advanced Setup)

This setting will allow you to specify one or more of the fol- lowing Communication Options for the Abbreviated Dial Number you are registering.

9a Select the

Communication

Option

9b Complete the Option Setup

9c Delayed Communications

Delayed Communication Default=off

Select to program a trans- mission start time.

Transmission Report

Default=off

Enables or disables the printing of a TX Report.

Line Monitor

Default=off

Enables or disables the line monitor speaker during dial- ing.

Quality TX

Default=off

Selects a lower modem speed for poor communica- tion links.

Sub Address

Default=none

Specifies a Sub Address for the Abbreviated Dial Number

To select default settings, press:

To skip the Communication Op- tions, press:

When “1.YES” is selected, the COMM. OPTIONS screen ap- pears. Complete the following steps for each item selected.

COMM. OPTIONS 1.COMPLETE 2.DELAYED COMM. 3.TX REPORT

4.LINE MONITOR 5.QUALITY TX 6.SUB ADDRESS 7.TEL LINE SELECT

If you have completed the de- sired Communication Options setting for this Abbreviated Dial Number, select COMPLETE by pressing:

ABB. NBR= 001

PRESS ONE TOUCH KEY TO ENTER OR [ENTER]:TO SKIP

Skip to Step 10.

To designate a specific time at which operations using this Ab- breviated Dial Number will be dialed, press:

DELAYED COMM.

TIME =HH:MM

:

Enter the desired transmission start time in either the 12-hour or 24-hour format depending on the machine setup. (example: 23:30 in the 24-hour format).

DELAYED COMM.

TIME =HH:MM 23:30

DELAYED COMM.

TIME =23:30

Displayed for 2 seconds

The display returns to the first screen in Step 9. Select the next Option.

being registered. The remote unit must support Sub-Ad- dress capabilities.

Tel Line Select Default=first available Specifies which tel line is se- lected when the 2nd Line is installed.

These items are outside the LCD frame. To view them, use the [ ] scroll key.

Then press:

73