Chapter 4 Error Messages

Table 4-1

Error Messages (continued)

 

 

 

 

 

 

 

 

Error Warning

 

 

 

 

ID

Error Warning Message

Description

 

 

 

EID-6113

Cannot delete shelf, {0}

One or more of the equipment modules

 

 

(provisioned virtual links, provisioned

 

 

server trails, provisioned protection groups,

 

 

or provisioned DCCs) in the shelf is

 

 

currently in use. Delete cards from all the

 

 

slots and try again.

 

 

 

EID-6114

The maximum number of supported shelves have already been

Refer to the error message text.

 

provisioned.

 

 

 

 

 

 

EID-6115

There are bad or duplicate shelf positions.

Refer to the error message text.

 

Valid rack numbers are {0} to {1}.

 

 

 

 

Valid rack positions are {2} to {3}.

 

 

 

 

 

 

EID-6116

Attempt to access an OchTrail connection that has been

Software has prevented an attempt to access

 

destroyed.

an OCH trail .

 

 

 

EID-6117

Attempt to access an OchTrail adit that has been destroyed.

The resource cannot be accessed because it

 

 

is released or fully utilized.

 

 

 

WID-6118

The following slots are provisioned but do not have cards

Refer to the warning message text.

 

installed:

 

 

 

 

{0}

 

 

 

 

CTC will assume they are ITU-T interfaces.

 

 

 

 

 

 

EID-6119

Unable to rearrange the shelves.

One of the following conditions is present:

 

{0}

duplicate shelf positions, invalid shelf

 

 

positions, or concurrent movement (two

 

 

CTC sessions are attempting to rearrange

 

 

the shelves at the same time.)

 

 

 

EID-6120

This equipment does not support multishelf.

Refer to the error message text.

 

 

 

WID-6121

This internal patchcord can not be provisioned because the end

The end points of an internal patchcord

 

points have no compatible wavelengths

should have compatible wavelengths.

 

 

 

EID-6122

Unable to start the wizard.

CTC was unable to initiate the wizard due

 

{0}

to the specified reason.

 

 

 

EID-6123

OSI request can not be completed successfully.

A communication failure occurred.

 

 

 

EID-6124

Invalid ALS recovery pulse interval.

Refer to the error message text.

 

 

 

EID-6125

Invalid ALS recovery pulse duration.

Refer to the error message text.

 

 

 

EID-6126

The current setting does not support the specified ALS mode.

Refer to the error message text.

 

 

 

EID-6127

All enabled routers are required to have the same area.

Refer to the error message text.

 

 

 

EID-6128

A software download is in progress. Configuration changes that

Refer to the error message text.

 

results a card reboot can not take place during software

 

 

 

 

download. Please try again after software download is done.

 

 

 

 

 

 

EID-6129

The payload configuration and card mode are incompatible.

Refer to the error message text.

 

 

 

EID-6135

DCC is present.

A data communication channel (DCC)

 

 

already exists.

 

 

 

EID-6136

Unable to provision: {0}

CTC was not able to provision the specified

 

 

port or card.

 

 

 

 

 

 

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

 

 

 

 

 

 

 

 

 

4-41

Page 319
Image 319
Cisco Systems ONS 15310-MA, ONS 15310-CL manual Error Warning Message Description

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.