Oos-Ma,Lpbk&Mt | Cisco Systems ONS 15310-MA, ONS 15310-CL manual

Chapter 4 Error Messages

Table 4-1	Error Messages (continued)

Error Warning
ID	Error Warning Message	Description

EID-6024	The destination of a {0} route cannot be a class D (224.0.0.0/4)	The destination of a static route must not be
	or class E (240.0.0.0/4) address.	a class D or class E address.

EID-6025	The destination of a {0} route cannot be a class A broadcast	The destination of a static route must not be
	address (x.255.255.255/8)	a class A broadcast address. It should be
		(xxx.0.0.0).

EID-6026	The destination of a {0} route cannot be a class B broadcast	The destination of a static route must not be
	address (x.x.255.255/16)	a class B broadcast address.

EID-6027	The destination of a {0} route cannot be a class C broadcast	The destination of a static route must not be
	address (x.x.x.255/24)	a class C broadcast address.

EID-6028	The destination of a {0} route cannot be the subnet broadcast	The destination of a static route must not be
	address associated with a node IP address.	a subnet broadcast address of a node IP.

EID-6029	The next hop of a static route cannot be the same as the	Static route must have the default route as
	destination of the route or an internal network{0}.	the next hop, and not destination of the
		route or internal network.

EID-6030	The next hop of a static default route must be the provisioned	The default route is selected for networks
	default router.	that do not have a specific route.

EID-6031	No more static routes can be created.	You have reached the maximum number of
		static routes.

EID-6032	This static route already exists.	Refer to the error message text.

EID-6033	Previous operation is still in progress.	Another operation is in progress. You must
		try after sometime.

EID-6035	Parent entity does not exist.	Refer to the error message text.

EID-6036	Parent PPM entity does not exist.	Create a parent entity for the PPM.

EID-6037	Equipment type is not supported.	CTC does not support this equipment.

EID-6038	Invalid PPM port.	Refer to the error message text.

EID-6039	Card is part of a regeneration group.	Select another card.

EID-6040	Out of memory.	Refer to the error message text.

EID-6041	Port is already present.	Refer to the error message text.

EID-6042	Port is used as timing source.	Choose another port because the selected
		port is being used as a timing source.

EID-6043	DCC or GCC is present.	Refer to the error message text.

EID-6044	Card or port is part of protection group.	Refer to the error message text.

EID-6045	Port has overhead circuit(s).	Refer to the error message text.

EID-6046	G.709 configuration is not compatible with data rate.	Refer to the error message text.

EID-6047	Port cannot be deleted because its service state is	To delete the port, you must change the port
	OOS-MA,LPBK&MT.	state to OOS-DSBLD.

EID-6048	{0} is {1}.	The trunk port is in the wrong state to carry
		out the action.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-37

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-MA, ONS 15310-CL manual Oos-Ma,Lpbk&Mt

Models: ONS 15310-CL ONS 15310-MA

Error Warning Message

OOS-MA,LPBK&MT.

ONS 15310-CL, ONS 15310-MA specifications