Chapter 4 Error Messages

Table 4-1

Error Messages (continued)

 

 

 

 

Error Warning

 

 

ID

Error Warning Message

Description

 

 

 

EID-3021

An error was encountered while retrieving the diagnostics:

Refer to the error message text.

 

{0}

 

 

 

 

EID-3022

Requested action not allowed.

The requested action is not allowed.

 

 

 

EID-3023

Unable to retrieve low order cross connect mode.

Refer to the error message text.

 

 

 

EID-3024

Unable to switch {0} cross connect mode.

CTC cannot switch the cross-connect mode

 

Please verify that the type and/or number of circuits

for the specified item, as the type or the

 

number of circuits does not match with the

 

provisioned does not exceed the criterion for switching modes.

 

 

criterion for switching modes.

 

 

 

EID-3025

Error while retrieving thresholds.

There was an error retrieving the thresholds.

 

 

 

EID-3026

Cannot modify send DoNotUse.

You cannot modify the Send DoNotUse

 

 

field.

 

 

 

EID-3027

Cannot modify SyncMsg.

You cannot modify the SyncMsg field.

 

 

 

EID-3028

Cannot change port type.

You cannot change the port type.

 

 

 

EID-3029

Unable to switch to the byte because an overhead change is

Refer to the error message text.

 

present on this byte of the port.

 

 

 

 

EID-3031

Error hard-resetting card.

There was an error while resetting card

 

 

hardware.

 

 

 

EID-3032

Error resetting card.

There was an error while resetting the card.

 

 

 

EID-3033

The lamp test is not supported on this shelf.

Refer to the error message text.

 

 

 

EID-3035

The cross connect diagnostics cannot be performed

Refer to the error message text.

 

 

 

EID-3036

The cross connect diagnostics test is not supported on this shelf.

The cross-connect diagnostics test is not

 

 

supported on this shelf.

 

 

 

EID-3039

Card change error.

There was an error while changing the card.

 

 

 

EID-3040

Invalid card type.

The selected card type is invalid.

 

 

 

EID-3041

Error applying changes.

CTC is unable to create a protection group.

 

 

Check if the protect port supports circuits, a

 

 

timing reference, SONET SDCC,

 

 

orderwire, or a test access point.

 

 

 

EID-3042

The flow control low value must be less than the flow control

Refer to the error message text.

 

high value for all ports in the card.

 

 

 

 

EID-3046

The flow control water mark value must be between {0} and

The flow control watermark value must be

 

{1}, inclusive.

between the two specified values.

 

 

 

EID-3047

The file named {0} could not be read. Please check the name

Refer to the error message text.

 

and try again.

 

 

 

 

EID-3048

There is no IOS startup config file available to download.

CTC could not find the configuration file

 

 

for IOS startup.

 

 

 

EID-3049

There is an update in progress so the download cannot be done

Refer to the error message text.

 

at this time.

 

 

 

 

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-16

Page 294
Image 294
Cisco Systems ONS 15310-CL, ONS 15310-MA manual Error Warning Message Description

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.