Chapter 1 General Troubleshooting

1.2.3 Perform a Terminal Loopback on a Destination-Node Port

e.In the Circuit Source dialog box, fill in the source Node, Slot, Port, and Type where the test set is connected and click Next.

f.In the Circuit Destination dialog box, fill in the destination Node, Slot, Port, and Type (the electrical port in the destination node) and click Finish.

Step 4 Confirm that the newly created circuit appears on the Circuits tab list as a two-way circuit.

Note Loopbacks operate only on ports in the OOS,MT administrative state.

Note It is normal for a 2.7.160 LPBKTERMINAL (DS1, DS3) or 2.7.161 LPBKTERMINAL (EC1) condition to appear during a loopback setup. The condition clears when you remove the loopback.

Step 5 Create the terminal loopback on the destination port being tested:

a.Go to the node view of the destination node:

From the View menu, choose Go To Other Node.

Choose the node from the drop-down list in the Select Node dialog box and click OK.

b.In node view, double-click the destination node (ONS 15310-CL or ONS 15310-MA).

c.Double-click the correct card, then click the appropriate following tabs:

Maintenance > DS1 > Loopback

Maintenance > DS3 > Loopback

Maintenance > EC1 > Loopback

d.Select OOS,MT from the Admin State column.

e.Select Terminal from the Loopback Type column.

f.Click Apply.

g.Click Yes in the confirmation dialog box.

Step 6 Continue with the “Test the Terminal Loopback Circuit on the Destination-Node Port” procedure on page 1-9.

Test the Terminal Loopback Circuit on the Destination-Node Port

Step 1 If the test set is not already sending traffic, send test-set traffic on the loopback circuit.

Step 2 Examine the test traffic being received by the test set. Look for errors or any other signal information that the test set is capable of indicating.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

1-9

Page 43
Image 43
Cisco Systems ONS 15310-MA, ONS 15310-CL manual

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.