Chapter 4 Error Messages

Table 4-1

Error Messages (continued)

 

 

 

 

 

 

 

 

Error Warning

 

 

 

 

ID

Error Warning Message

Description

 

 

 

EID-6074

End System mode only supports one subnet.

Refer to the error message text.

 

 

 

EID-6075

Trying to remove MAT entry that does not exit.

CTC is removing the MAT entry.

 

 

 

EID-6076

Cannot {0} TARP manual adjacency entry:

CTC cannot add the specified adjacency

 

{1}

entry for reasons unknown.

 

 

 

EID-6077

Area address shall be 1 to 13 bytes long.

The area address should not be more than 13

 

 

characters.

 

 

 

EID-6078

TDC entry with TID {0} does not exist in the table.

The specified Tunnel Identifier does not

 

 

exist.

 

 

 

EID-6079

Unable to remove TDC entry with TID {0}.

You must enable TARP inorder to remove

 

Please verify that TARP is enabled.

the TDC entry.

 

 

 

WID-6080

Router #{0} does not have an area address in common with

Refer to the warning message text.

 

router #1. Switching from IS L1/L2 to IS L1 in this case will

 

 

 

 

partition your network.

 

 

 

 

 

 

EID-6081

The limit of 10 RADIUS server entries has been reached.

CTC does not allow more than 10 RADIUS

 

 

servers.

 

 

 

EID-6082

{0} cannot be empty.

The Shared Secrets field should not be

 

 

empty.

 

 

 

EID-6083

The entry you selected for editing has been altered by other.

Refer to the error message text.

 

Changes cannot be committed.

 

 

 

 

 

 

EID-6084

The RADIUS server entry already exists.

Specify another RADIUS server entry.

 

 

 

WID-6085

Disabling shell access will prevent Cisco TAC from connecting

Refer to the warning message text.

 

to the vxWork shell to assist users.

 

 

 

 

 

 

EID-6086

Cannot change card. Card resources are in use.

The card you are trying to remove is being

 

 

used. Cannot change the card.

 

 

 

EID-6087

Cannot change card. The new card type is invalid or

Refer to the error message text.

 

incompatible.

 

 

 

 

 

 

EID-6088

This line cannot be put into loopback while it is in use as a

Refer to the error message text.

 

timing source

 

 

 

 

 

 

EID-6089

Interface not found. {0}

CTC cannot find the specified interface.

 

 

 

EID-6090

Interface type not valid for operation. {0}

Choose another interface.

 

 

 

EID-6091

The current state of the interface prohibits this operation. {0}

The port is in an invalid state to set a

 

 

loopback.

 

 

 

EID-6092

Operation prohibited for this interface. {0}

CTC does not allow this operation for the

 

 

specified interface.

 

 

 

EID-6093

Max number of Tarp Data Cache entries exceeded.

You have exceeded the number of

 

 

characters permitted.

 

 

 

EID-6094

Max number of Manual Adjacency Table entries exceeded.

Refer to the error message text.

 

 

 

EID-6095

Invalid Ais/Squelch mode.

Refer to the error message text.

 

 

 

EID-6096

Default IP Over CLNS tunnel route is only allowed on a node

Refer to the error message text.

 

without a default static route and a default router of 0.0.0.0

 

 

 

 

 

 

 

 

 

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

 

 

 

 

 

 

 

 

 

4-39

Page 316 Page 318
Page 317
Image 317
Cisco Systems ONS 15310-MA, ONS 15310-CL manual Error Warning Message Description
Page 316 Page 318

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.
Top Page Image Contents