Chapter 4 Error Messages

Table 4-1

Error Messages (continued)

 

 

 

 

Error Warning

 

 

ID

Error Warning Message

Description

 

 

 

WID-5051

Unable to transition port state indirectly because the port

Refer to the warning message text.

 

aggregates OCH CC circuits: if the port state should be

 

 

changed, edit it directly via port provisioning

 

 

 

 

EID-5052

The operation is not valid for the connection type

You may have selected the incorrect switch.

 

 

 

EID-5053

The operation cannot be performed because the connection is

Refer to the error message text.

 

under test access

 

 

 

 

EID-5054

TL1 Tunnel Open Failed: {0}

Refer to the error message text.

 

 

 

EID-5055

Some patchcords were not deleted. Patchcords cannot be

Refer to the error message text.

 

deleted if they are incomplete or support any circuits, or if the

 

 

nodes supporting them are not connected.

 

 

 

 

EID-5056

This PPC cannot be deleted because one or more circuits are

Remove the circuits provisioned over the

 

provisioned over it.

provisionable patchcord before trying to

 

 

delete it.

 

 

 

EID-5057

Adding last node not completed yet.

Refer to the error message text.

 

Please wait before trying to add new node.

 

 

 

 

EID-5058

OCHNC Upgrade is applicable only to bidirectional circuits.

Refer to the error message text.

 

 

 

EID-5059

OCHNC upgrade failed.

CTC encountered a complete failure while

 

One or more communication failures occurred during the

upgrading optical channel network

 

operation.

connection.

 

 

 

EID-5060

OCHNC upgrade partially failed.

CTC encountered a partial failure while

 

One or more communication failures occurred during the

upgrading an optical channel network

 

operation.

connection.

 

Create the OCH CC manually.

 

 

 

 

EID-5061

Overhead circuit source and destination must reside on the

Refer to the error message text.

 

same shelf.

 

 

 

 

EID-6000

Platform does not support power monitoring thresholds

Refer to the error message text.

 

 

 

EID-6001

One of the XC cards has failures or is missing.

Check whether all the cross-connect cards

 

 

are installed and working.

 

 

 

EID-6002

One of the XC cards is locked.

Unlock the cross-connect card.

 

 

 

EID-6003

Unable to create OSC termination.

Enter a new ID for the ring.

 

Ring ID already assigned.

 

 

 

 

EID-6004

Unable to perform a system reset while a BLSR ring is

Remove the BLSR from the node and

 

provisioned on the node.

continue with the reset procedure.

 

 

 

EID-6005

Could not assign timing references:

Refer to the error message text.

 

- Only two DS1 or BITS interfaces can be specified.

 

 

- DS1 interfaces cannot be retimed and used as a reference

 

 

- BITS-2 is not supported on this platform.

 

 

 

 

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-35

Page 312 Page 314
Page 313
Image 313
Cisco Systems ONS 15310-MA, ONS 15310-CL manual Error Warning Message Description
Page 312 Page 314

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.
Top Page Image Contents