Ldcc, Los | Cisco Systems ONS 15310-CL, ONS 15310-MA guide

Chapter 4 Error Messages

Table 4-1	Error Messages (continued)

Error Warning
ID	Error Warning Message	Description

WID-3275	Make sure the Remote Interface ID and the Local Interface ID	Refer to the warning message text.
	on the two sides are matched. (Local Interface ID on this node
	should equal Remote Interface ID on the neighbor node and
	vice-versa.)

WID-3276	Both {0} and {1} exist on the same selected port.	The specified port has both SDCC and
	{2}	LDCC.

WID-3277	The description cannot contain more than {0} characters. Your	The input exceeds the character limit. The
	input will be truncated.	value will be truncated to the maximum
		chacter limit.

WID-3279	Card deleted, returning to shelf view.	CTC returns to node view.

WID-3280	ALS will not engage until both the protected trunk ports detect	Refer to the warning message text.
	LOS.

WID-3282	Performing a software upgrade while TSC 5 is active could	Refer to the warning message text.
	result in a service disruption. It is recommended that you make
	TSC 10 the active TSC by performing a soft reset of TSC 5. The
	following 15600s are currently unsafe to upgrade...

WID-3283	Before activating a new version, make sure you have a database	Refer to the warning message text.
	backup from the current version.

WID-3284	Reverting to an older version.	CTC is being reverted to an older version of
		application.

WID-3285	Applying FORCE or LOCKOUT operations may result in	Refer to the warning message text.
	traffic loss.

WID-3286	The ring status is INCOMPLETE. CTC cannot determine if	Refer to the warning message text.
	there are existing protection operations or switches in other
	parts of the ring. Applying a protection operation at this time
	could cause a traffic outage. Please confirm that no other
	protection operations or switches exist before continuing.

WID-3287	There is a protection operation or protection switch present on	Refer to the warning message text.
	the ring. Applying this protection operation now will probably
	cause a traffic outage.

WID-3288	This ring status is INCOMPLETE. CTC will not be able to	Change the ring status to apply the change
	apply this change to all of the nodes in the {0}.	to all nodes in the ring type.

EID-3290	Unable to delete specified provisionable patchcord(s).	Refer to the error message text.

EID-3291	Cannot change revertive behavior due to an active protection	Protection switch should not be active to
	switch.	change the revertive behaviour.

EID-3292	Error resetting shelf.	CTC encountered an error while resetting
		the node.

EID-3293	No such provisionable patchcord.	You are attempting to delete a provisionable
		patchcord that does not exist. This happens
		when multiple instances of CTC are
		running and attempting to delete the same
		provisionable patchcord concurrently.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-26

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-CL, ONS 15310-MA manual Ldcc, Los

Models: ONS 15310-CL ONS 15310-MA

Error Warning Message

LDCC.

LOS.

ONS 15310-CL, ONS 15310-MA specifications