Error Warning Message Description | Cisco Systems ONS 15310-CL

Chapter 4 Error Messages

Table 4-1		Error Messages (continued)

Error Warning
ID		Error Warning Message	Description

EID-2130		The ring ID value, {0}, is not valid. Please enter a valid number	Enter a ring ID value between 0 and 9999.
		between 0 and 9999.

EID-2131		Cannot set reversion to INCONSISTENT.	You must select another reversion type.

EID-2135		Unable to store overhead circuit preferences:	Input/Output error. Unable to store
		{0}	overhead circuit preferences.
		{0}

EID-2137		Circuit merge error. {0}	There was an error while merging the
			circuits.

EID-2138		Cannot delete all destinations. Please try again.	Refer to the error message text.

EID-2139		Error updating destinations.	There was an error in updating the circuit
			destinations.

EID-2143		No online help version selected. Cannot delete the online help	Select the version of online help, and
		book.	proceed.

EID-2144		Error deleting online help book(s).	You cannot delete the specified online help.
		{0}

EID-2145		Unable to locate a node with an IOS card.	Refer to error message.

EID-2146		Security violation. You may only logout your own account.	You cannot logout of an account other than
			your own.

EID-2147		Security violation. You may only change your own account.	You cannot change an account other than
			your own.

EID-2148		Security violation. You may not delete the account under which	You cannot delete the account you are
		you are currently logged in.	currently loggd in.

WID-2149		There is nothing exportable on this view.	Refer to the error message text.

WID-2150		Node {0} is not initialized. Please wait and try again.	Wait till the specified node is initialized and
			try again.

WID-2152		Spanning tree protection is being disabled for this circuit.	Refer to the warning message text.

WID-2153		Adding this drop makes the circuit a PCA circuit.	Refer to the warning message text.

WID-2154		Disallow creating monitor circuits on a port grouping circuit.	Refer to the warning message text.

WID-2155		Only partial switch count support on some nodes.	The specified nodes do not support switch
		{0}	counts completely.

WID-2156		Manual roll mode is recommended for dual rolls. For auto dual	Refer to the warning message text.
		rolls, please verify that roll to facilities are in service and error
		free.

WID-2157		Cannot complete roll(s).	CTC could not complete the roll because
		{0}	the roll is destroyed, in an incomplete state,
			in a TL1_roll state, is cancelled, or is not
			ready to complete.

EID-2158		Invalid roll mode.	There are two roll modes: auto and manual.
		{0}	For a one-way circuit source roll, the roll
			mode must be auto and for a one- way
			circuit destination roll, the roll mode must
			be manual.

	Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-10

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-CL, ONS 15310-MA manual Error Warning Message Description

Models: ONS 15310-CL ONS 15310-MA

Error Warning Message

Description

ONS 15310-CL, ONS 15310-MA specifications