Frcdwkswpr-No-Trfsw, Intrusion | Cisco Systems ONS 15310-CL guide

Chapter 3 Transient Conditions

3.3.13 FRCDWKSWPR-NO-TRFSW

3.3.13 FRCDWKSWPR-NO-TRFSW

The Forced Switch to Protection Resulted in No Traffic Switch (FRCDWKSWPR-NO-TRFSW) condition occurs when you perform a Force Switch to the protect port/card, and the protect port/card is already active.

This transient condition does not result in a standing condition.

3.3.14 INTRUSION

The Invalid Login Username (INTRUSION) condition occurs when you attempt to log in with an invalid user ID.

This transient condition does not result in a standing condition.

3.3.15 INTRUSION-PSWD

The Security Intrusion Attempt Detected (INTRUSION -PSWD) condition occurs when you attempt to log in with an invalid password.

This transient condition does not result in a standing condition.

3.3.16 LOGIN-FAILURE-LOCKOUT

The Invalid Login–Locked Out (LOGIN-FAILURE-LOCKOUT) condition occurs when you attempt to log into a locked account.

This transient condition does not result in a standing condition.

3.3.17 LOGIN-FAILURE-ONALRDY

The Security: Invalid Login–Already Logged On (LOGIN-FAILURE-ONALRDY) condition occurs when you attempt to log into a node where you already have an existing session and a Single-User-Per-Node (SUPN) policy exists.

This transient condition does not result in a standing condition.

3.3.18 LOGIN-FAILURE-PSWD

The Invalid Login–Password (LOGIN-FAILURE-PSWD) condition occurs when you attempt to log in with an invalid password.

This transient condition does not result in a standing condition.

3.3.19 LOGIN-FAILURE-USERID

The Invalid Login–Username (LOGIN-FAILURE-USERID) condition occurs when a user login (CTC, Cisco Transport Manager [CTM], or TL1) fails because the login username is not present on the node database. You must log in again with an existing user ID.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

3-6

Image 274

Cisco Systems ONS 15310-CL, ONS 15310-MA manual Frcdwkswpr-No-Trfsw, Intrusion, Login-Failure-Lockout, Login-Failure-Onalrdy

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Contents

Cisco ONS 15310-CL Cisco ONS 15310-MA Troubleshooting Guide Copyright 2006-2007 Cisco Systems Inc. All rights reserved N T E N T S Iii Feac Send Code Test the OC-N Controller Card 10.1 Alarm Troubleshooting Vii AUTOSW-AIS Viii DUP-SHELF-ID2-46 Ehibatvg Clear the Ehibatvg Alarm EXTRA-TRAF-PREEMPT2-56 FE-FRCDWKSWBK-SPAN2-61 Hello Xii 129 LOA Xiii Lpbkcrs Xiv 190 RAI 198 SD Xvi Swtothird Xvii TX-RAI Xviii Xix Error Messages G U R E S Xxi Xxii B L E S Xxiii Power Supply Problems Xxiv Revision History Xxv Document Organization Document ObjectivesAudience Related Documentation Boldface Document ConventionsXxvii Bewaar Deze Instructies Xxviii Warnung Wichtige Sicherheitshinweise Xxix Spara Dessa Anvisningar Xxx GEM Disse Anvisninger Xxxi Xxxii Cisco Optical Networking Product Documentation CD-ROM Where to Find Safety and Warning InformationObtaining Optical Networking Information Xxxiii Xxxiv General Troubleshooting Network Troubleshooting Tests Facility Loopback Hairpin Circuit Terminal LoopbackCross-Connect Loopback Perform a Facility Loopback on a Source-Node Port Create the Facility Loopback on the Source-Node Port Test the Facility Loopback Test the Electrical Cabling Perform a Hairpin on a Source-Node PortCreate the Hairpin on the Source-Node Port Page Test the Hairpin Circuit Perform a Terminal Loopback on a Destination-Node PortCreate the Terminal Loopback on a Destination-Node Port Page Perform a Hairpin Test on a Destination-Node Port Continue with the Test the Hairpin Circuit procedure on Perform a Facility Loopback on a Destination Port Create a Facility Loopback Circuit on a Destination Port Test the Facility Loopback Circuit Perform a Facility Loopback on a Source-Node OC-N Port Identify Points of Failure on an OC-N Circuit PathCreate the Facility Loopback on the Source OC-N Port Click the Maintenance Optical Loopback Port tabs Perform a Cross-Connect Loopback on the Source OC-N Port Create the Cross-Connect Loopback on the Source OC-N Port Test the Cross-Connect Loopback Circuit Perform a Terminal Loopback on a Source-Node OC-N Port Create the Terminal Loopback on a Source Node OC-N Port Test the Terminal Loopback Circuit Click the Maintenance Optical Loopback Port tabs Test the Facility Loopback Circuit Test the Terminal Loopback Circuit Perform a Facility Loopback on a Destination-Node OC-N Port Create the Facility Loopback on a Destination-Node OC-N Port Test the Facility Loopback Circuit Perform a Terminal Loopback on a Destination-Node OC-N Port Create the Terminal Loopback on a Destination-Node OC-N Port Test the Terminal Loopback Circuit Feac Send Code Feac Alarms WBE-28/WBE-84 Inhibit Feac Loopback Troubleshooting Ethernet Circuit Paths With Loopbacks Perform a Facility Loopback on a Source-Node Ethernet Port Click the Maintenance Loopback tabsTest and Clear the Facility Loopback Circuit Cisco ONS 15310-MA Procedure Guide Test the Ethernet Card Perform a Terminal Loopback on a Source-Node Ethernet Port Create the Terminal Loopback on a Source-Node Ethernet Port Test and Clear the Ethernet Terminal Loopback Circuit Test the Ethernet Card Create a Facility Loopback on an Intermediate-Node OC-N Port Test and Clear the OC-N Facility Loopback Circuit Test the OC-N Controller Card Perform a Terminal Loopback on Intermediate-Node OC-N Ports Create a Terminal Loopback on Intermediate-Node OC-N Ports Test and Clear the OC-N Terminal Loopback Circuit Test the OC-N Card Cisco ONS 15310-MA Procedure Guide Connect a test set to the CE100T-8 card that you are testing Test and Clear the Ethernet Facility Loopback Circuit Connect a test set to the CE100T-8 port that you are testing Click the Maintenance Loopback tabs Test and Clear the Ethernet Terminal Loopback Circuit PC Connectivity Troubleshooting Restore the Database and Default SettingsRestore the Node Database 2 Sun, Solaris, or Unix System Minimum Requirements Windows PC System Minimum RequirementsSupported Platforms, Browsers, and JREs Verify the IP Configuration of Your Windows PC Unable to Verify the IP Configuration of Your Windows PCUnsupported Platforms and Browsers Browser Login Does Not Launch Java Close the Java Plug-in Control Panel window Reconfigure the Browser Unable to Verify the NIC Connection on Your Windows PC Replacement LAN Cables procedure on Verify Windows PC Connection to the Node Ping Unable to Launch CTC Help After Removing Netscape CTC Operation TroubleshootingPing the ONS 15310-CL or ONS 15310-MA Set Internet Explorer as the Default Browser for CTC Unable to Change Node View to Network View Browser Stalls When Downloading CTC JAR Files from port Example CTC Does Not Launch Disable the VirusScan Download ScanUncheck the Enable Internet download scanning check box Redirect the Netscape Cache to a Valid Directory Sluggish CTC Operation or Login Problems Delete the CTC Cache File Automatically Delete the CTC Cache File Manually Deleting the CTC Cache Node Icon is Gray on CTC Network View NOT-AUTHENTICATEDINCOMPATIBLE-SW Java Runtime Environment Incompatible Launch CTC to Correct the Core Version Build Build procedure on Different CTC Releases Do Not Recognize Each Other Superuser Password Needs to Be Reset Username or Password Does Not Match the Port InformationVerify Correct Username and Password Reset the ONS 15310-CL or ONS 15310-MA Password No IP Connectivity Exists Between Nodes Cancel the Circuit Creation and Start Over Path in Use Error When Creating a CircuitDCC Connection Lost Calculate and Design IP Subnets Circuits and TimingCircuit Transitions to Partial Status Circuits Remain in Partial Status View the State of Circuit Nodes Clear AIS-V on Unused Controller Card VT Circuits AIS-V on Unused 15310-CL-CTX Card VT CircuitsClick Circuits Circuit Creation Error with VT1.5 Circuit 10.5 OC-3 and DCC Limitations ONS 15310-CL or ONS 15310-MA Switches Timing Reference Holdover Synchronization Alarm Blinking Stat LED after Installing a Card Free-Running Synchronization ModeDaisy-Chained Bits Not Functioning Faulty Fiber-Optic Connections Bit Errors Appear for a Traffic CardFiber and Cabling Verify Fiber-Optic Connections Crimp Replacement LAN Cables End view of RJ-45 plug Pin Color Pair Name Power and LED Tests Power Supply Problems Power Consumption for Node and Cards See , Alarm Troubleshooting, for information about specific Lamp Tests for Card LEDs CTC, click the Maintenance Diagnostic tabs Click Lamp TestVerify Card LED Operation Page Alarm Troubleshooting Alarm Index by Default Severity CTENQPT-PB-WORK Eqpt LOM STSMON, Ststrm SQM Ststrm Critical Alarms CRMajor Alarms MJ ENCAP-MISMATCH-P Ststrm LOP-P Stsmon SWMTXMOD-PROT Eqpt Minor Alarms MN CONTBUS-CLK-B Eqpt ISIS-ADJ-FAIL OCN Sftwdown Eqpt Not Alarmed Conditions Feprlf OCN LOS Bits TIM-P Stsmon HI-LASERBIAS Eqpt VCG-DEG VCG TX-RAI DS3Frcdswtopri EXT-SREF Frcdswtopri NE-SREF Alarms and Conditions Indexed By Alphabetical Entry Not Reported NR ConditionsPage Page Alarm Logical Objects Type Definition Alarm List by Logical Object Type Type Definition NE Sysboot MJ Stsmon AUTOSW-UNEQ NA OCN AS-CMD NA Ststrm RFI-P NR OCN FE-MANWKSWBK-SPAN NA System Logbufrovfl Alarm Troubleshooting Alarm List by Logical Object Type Trouble Notifications Alarm CharacteristicsCondition Characteristics Severities LOS Alarm HierarchyLOF Lowest DS-N AIS if reported for Outgoing DS-N signals RFI-L RFI-P RFI-V Service Effect Safety SummaryStates AIS-L Alarm Procedures1 AIS Clear the AIS Condition Clear the AIS-L Condition AIS-PAIS-V Clear the AIS-P Condition Apsb 5 ALSAPC-END Apscdfltk Apscincon Clear the Apscincon AlarmClear the Apscm Alarm Apscm Apscnmis Clear the Apsimp AlarmApsimp APS-INV-PRIM Clear the Apsmm AlarmApsmm APS-PRIM-SEC-MISM Clear the APS-PRIM-SEC-MISM AlarmAPS-PRIM-FAC AS-CMD AS-MT Clear the AS-CMD Condition Clear the AS-MT Condition AS-MT-OOGAUD-LOG-LOSS Clear the AUD-LOG-LOSS Condition AUD-LOG-LOW AutoresetClear the Autoreset Alarm Autolsroff AUTOSW-LOP Stsmon AUTOSW-AISClear the AUTOSW-AIS Condition AUTOSW-PDI Clear the AUTOSW-LOP VT-MON AlarmAUTOSW-LOP VT-MON Clear the AUTOSW-LOP Stsmon Condition Clear the AUTOSW-SDBER Condition AUTOSW-SDBERAUTOSW-SFBER Clear the AUTOSW-SFBER Condition AUTOSW-UNEQ VT-MON Clear the AUTOSW-UNEQ VT-MON AlarmAUTOSW-UNEQ Stsmon BAT-FAIL Clear the Bkupmemp Alarm Clear the BAT-FAIL AlarmBkupmemp Blsrosync Lear the Carloss CE100T AlarmCarloss CE100T Alarm Troubleshooting Carloss CE100T Carloss Eqpt Clear the Carloss Eqpt Alarm Click the Provisioning Pluggable Port Modules tabs Comioxc Clear the Comioxc AlarmCldrestart Clear the Cldrestart Condition CONTBUS-CLK-A Clear the CONTBUS-CLK-A AlarmCONTBUS-CLK-B CONTBUS-DISABLED Clear the CONTBUS-CLK-B Alarm Clear the CONTBUS-IO-A Alarm Clear the CONTBUS-DISABLED AlarmCONTBUS-IO-A Clear the CTNEQPT-PBPROT Alarm CTNEQPT-PBPROT Clear the CTNEQPT-PBWORK Alarm CTNEQPT-PBWORK Dataflt Clear the Dataflt AlarmClear the Dbosync Alarm Dbosync 49 DS3-MISM Clear the Disconnected AlarmDisconnected Clear the DS3-MISM Condition DUP-NODENAME Clear the DUP-IPADDR AlarmDUP-IPADDR Node view, click the Provisioning Network General tabs DUP-SHELF-ID Clear the DUP-NODENAME AlarmClear the Ehibatvg Alarm Ehibatvg Clear the Elwbatvg Alarm ENCAP-MISMATCH-P 56 EOC Clear the ENCAP-MISMATCH-P AlarmClick the Provisioning Card tabs Clear the EOC Alarm Click the Provisioning Optical Line tabs EOC-L Click the Provisioning Comm Channels Sdcc tabs Clear the Eqpt Alarm Clear the EOC-L AlarmEqpt ERFI-P-CONN EQPT-MISSClear the ERFI-P-CONN Condition ERFI-P-SRVR ERROR-CONFIGERFI-P-PAYLD Clear the ERFI-P-PAYLD Condition Clear the ERROR-CONFIG Alarm W-MISMATCH Clear the Exccol AlarmETH-LINKLOSS Exccol EXTRA-TRAF-PREEMPT Clear the EXT Alarm67 EXT Failtosw 71 FAN FAILTOSW-PATHFAN-DEGRADE Clear the FE-AIS Condition FE-AISFE-DS1-MULTLOS Clear the FE-DS1-MULTLOS Condition Clear the FE-DS1-NSA Condition FE-DS1-NSAFE-DS1-SA Clear the FE-DS1-SA Condition Clear the FE-DS1-SNGLLOS Condition FE-DS1-SNGLLOSFE-DS3-NSA Clear the FE-DS3-NSA Condition FE-FRCDWKSWBK-SPAN FE-DS3-SAFE-EQPT-NSA Clear the FE-DS3-SA Condition FE-LOCKOUTOFPR-SPAN FE-FRCDWKSWPR-SPANFE-IDLE Clear the FE-FRCDWKSWBK-SPAN Condition FE-MANWKSWBK-SPAN FE-LOFFE-LOS Clear the FE-LOF Condition Feprlf Clear the Feprlf AlarmFE-MANWKSWPR-SPAN FORCED-REQ Frcdswtopri FORCED-REQ-SPANFrcdswtoint Clear the FORCED-REQ-SPAN Condition Frngsync FrcdswtosecFrcdswtothird Clear the Frngsync Condition FULLPASSTHR-BI Clear the GFP-CSF AlarmFstsync GFP-CSF GFP-LFD Clear the GFP-EX-MISMATCH AlarmClear the GFP-LFD Alarm GFP-UP-MISMATCH Hello Clear the GFP-UP-MISMATCH AlarmClear the Hello Alarm Click the Provisioning Port Distance Extension tabs Hibatvg Clear the Hibatvg AlarmClear the HI-LASERBIAS Alarm HI-LASERBIAS HI-LASERTEMP Clear the HI-LASERTEMP AlarmClick the Performance Optics PM tabs Clear the Hitemp Alarm HI-RXPOWERClear the HI-RXPOWER Alarm Hitemp Clear the HI-TXPOWER Alarm HI-TXPOWERHldovrsync Clear the Hldovrsync Alarm Clear the Improprmvl Alarm Clear the I-HITEMP AlarmImproprmvl Click the Provisioning Timing General tabs INC-ISD Clear the INCOMPATIBLE-SEND-PDIP AlarmClear the INCOMPATIBLE-SW Alarm INCOMPATIBLE-SEND-PDIP INTRUSION-PSWD InhswprInhswwkg Clear the Inhswpr Condition Ioscfgcopy Click Clear Security Intrusion AlarmInvmacadr ISIS-ADJ-FAIL Click Provisioning OSI Routers Setup Clear the ISIS-ADJ-FAIL AlarmClick the Provisioning OSI Routers Setup tabs Lasereol KB-PASSTHRLCAS-CRC LCAS-RX-FAIL Transmit node LCAS-TX-DNU LCAS-TX-ADDClear the LCAS-RX-FAIL Condition 129 LOA Clear the LOA AlarmLKOUTPR-S Clear the LKOUTPR-S Condition LOF Bits Clear the LOF Bits AlarmLOCKOUT-REQ Clear the LOCKOUT-REQ Condition Click the Provisioning Timing Bits Facilities tabs Clear the LOF DS1 AlarmLOF DS1 Click the Provisioning DS1 Line tabs LOF DS3 Clear the LOF DS3 AlarmLOF EC1 LOF OCN Clear the LOF EC1 AlarmClear the LOF OCN Alarm LOF Ststrm LOGBUFR90 Clear the LOF Ststrm AlarmClear the Logbufrovfl Alarm Logbufrovfl LO-LASERBIAS Clear the LO-LASERBIAS AlarmLO-LASERTEMP 141 LOM Clear the LOM AlarmClear the LOP-P Alarm LOP-P Clear the LO-RXPOWER Alarm LO-RXPOWERClear the LOP-V Alarm LOP-V Clear the LOS Bits Alarm LOS Bits Click the Maintenance DS1 tabs Clear the LOS DS1 AlarmLOS DS1 Clear the LOS DS3 Alarm LOS DS3 Click the Maintenance DS3 tabs LOS EC1 LOS Fudc Clear the LOS EC1 AlarmClick the Provisioning EC1 Line tabs Clear the LOS Fudc Alarm LOS OCN Clear the LOS OCN Alarm Lpbkcrs LO-TXPOWERClear the LO-TXPOWER Alarm Click the Provisioning Optical Optics Thresholds tabs Clear the Lpbkcrs Condition LPBKDS3FEACLPBKDS3FEAC-CMD Clear the LPBKDS3FEAC Condition Clear the Lpbkfacility CE100T Condition Lpbkfacility CE100TLpbkfacility DS1, DS3 102 Clear the Lpbkfacility DS1, DS3 Condition Lpbkfacility EC1Lpbkfacility OCN Clear the Lpbkfacility EC1 Condition Clear the Lpbkfacility OCN Condition Lpkterminal CE100TLpbkterminal DS1, DS3 Clear the Lpbkterminal CE100T Condition Clear the Lpbkterminal DS1, DS3 Condition Lpbkterminal EC1Lpbkterminal OCN Clear the Lpbkterminal EC1 Condition MAN-REQ Clear the Lwbatvg AlarmLwbatvg Clear the Lpbkterminal OCN Condition Manswtopri ManresetManswtoint Manswtosec Mateclk ManswtothirdMANUAL-REQ-SPAN Clear the MANUAL-REQ-SPAN Condition MEA Eqpt Clear the Mateclk AlarmClear the MEA Eqpt Alarm 109 Click the Provisioning Protection tabs MEA FANMEA PPM 110 MEM-LOW NO-CONFIGMEM-GONE Mfgmem OOU-TPT NOT-AUTHENTICATEDClear the NO-CONFIG Condition 112 Clear the OOT-TPT Condition OPEN-SLOTPDI-P Clear the OPEN-SLOT Condition Clear the PDI-P Condition 114 PLM-V Clear the PLM-P AlarmPLM-P 115 PRC-DUPID Clear the PLM-V AlarmClear the Protna Alarm Protna PWR-FAIL-A Clear the PWR-FAIL-A AlarmPROV-MISMATCH 117 190 RAI Clear the PWR-FAIL-B AlarmPWR-FAIL-B RFI-L Clear the RFI-P Condition RFI-PClear the RFI-L Condition 119 Clear the RFI-V Condition RFI-VRoll 120 RUNCFG-SAVENEED ROLL-PENDRprw Clear the Rprw Condition 198 SD 122 Clear the SD DS1, DS3 Condition SD-L123 Clear the SD-L Condition SD-P124 Clear the SD-P Condition SD-V202 SF Clear the SD-V Condition Clear the SF DS1, DS3 Condition SF-LSF-P Clear the SF-L Condition SHELF-COMM-FAIL SftwdownSF-V Clear the SF-P Condition Squelch Clear the SNTP-HOST AlarmSNTP-HOST Squelched SSM-DUS Clear the SQM Alarm211 SQM SSM-FAIL SSM-PRS Clear the SSM-FAIL AlarmSSM-OFF SSM-RES SSM-ST3 SSM-SMCSSM-ST2 SSM-ST3E SSM-TNC SSM-ST4SSM-STU Clear the SSM-STU Condition SW-MISMATCH Clear the SWMTXMOD-PROT AlarmSTS-SQUELCH-L SWMTXMOD-PROT Swtopri Clear the SWMTXMOD-WORK AlarmSWMTXMOD-WORK Swtosec Syncpri SwtothirdSYNC-FREQ Clear the Swtothird Condition Syncsec Clear the Syncpri AlarmClear the Syncsec Alarm Node view, click the Provisioning Timing General tabs Syncthird SysbootClear the Syncthird Alarm 236 TIM Clear the TIM Alarm 138 TIM-P Clear the TIM-P AlarmTIM-MON TIM-S TIM-V Clear the TIM-S AlarmClear the TIM-V Alarm Tptfail CE100T TX-LOF Clear the Tptfail CE100T AlarmTX-AIS Clear the TX-AIS Condition UNEQ-P Clear the UNEQ-P AlarmTX-RAI Clear the TX-RAI Condition Complete the Delete a Circuit procedure on 143 VCG-DEG Clear the UNEQ-V AlarmUNEQ-V 144 Clear the VCG-DEG Condition VCG-DOWNVT-SQUELCH-L Clear the VCG-DOWN Condition 251 WTR DS-1 Line AlarmsWkswpr Clear the Wkswpr Condition Traffic Card LED Activity Typical Card LED Activity During ResetProtection Switching, Lock Initiation, and Clearing 147 Initiate a 1+1 Manual Switch Command Initiate a 1+1 Protection Port Force Switch Command148 Initiate a Lock-On Command Clear a 1+1 Force or Manual Switch Command149 Initiate an ONS 15310-MA 11 Card Switch Command Initiate a Card or Port Lockout CommandClear a Lock-On or Lockout Command 150 Node view, choose Go to Network View from the View menu Click the Perform Path Protection span switching field151 152 Soft- or Hard-Reset a Controller Card CTC Card Resetting and SwitchingSoft- or Hard-Reset an Ethernet or Electrical Card in CTC 153 Physically Replace a Card Physical Card Reseating and ReplacementRemove and Reinsert Reseat a Card 154 Delete a Circuit Generic Signal and Circuit ProceduresVerify the Signal BER Threshold Level Verify or Create Node DCC Terminations Clear a DS-3 or DS-1 Port Loopback Circuit Clear an OC-N Port Facility or Terminal Loopback CircuitClear an OC-N Port XC Loopback Circuit 156 Clear an Ethernet Card Loopback Circuit Click the Maintenance EC1 Loopback tabsClear an EC-1 Port Loopback 157 158 Transient Conditions Transients Indexed By Alphabetical Entry LOGIN-FAILURE-LOCKOUT Condition States Trunk Eqpt Escon FC, GE ISC OCN Stsmon VT-MON Transient Conditions DBRESTORE-FAIL ADMIN-SUSPEND-CLRDBBACKUP-FAIL AUD-ARCHIVE-FAIL LOGIN-FAILURE-PSWD LOGIN-FAILURE-LOCKOUTLOGIN-FAILURE-ONALRDY LOGIN-FAILURE-USERID MANWKSWBK-NO-TRFSW RMON-ALARMLOGOUT-IDLE-USER MANWKSWPR-NO-TRFSW SESSION-TIME-LIMIT RMON-RESETUSER-LOGIN SFTWDOWN-FAIL Wrmrestart Wrmrestart Error Messages EID-0 EID-1 Error Warning Message Description Error Warning Message Description Error Warning Message Description Vlan Error Warning Message Description Error Warning Message Description Blsr Error Warning Message Description Error Warning Message Description Error Warning Message Description Error Warning Message Description Error Messages CTC Error Warning Message Description Error Warning Message Description 1LOCKEDON/LOCKEDOUT Error Warning Message Description Error Warning Message Description Error Warning Message Description Error Messages Ospf Error Warning Message Description Error Warning Message Description Ldcc Error Warning Message Description Error Warning Message Description CTC Error Warning Message Description Provisioning Error Warning Message Description Error Warning Message Description Error Warning Message Description Error Warning Message Description Line External OOS-MA,LPBK&MT Error Messages Error Warning Message Description APC Aborted Error Warning Message Description Error Warning Message Description Apscdfltk APSC-IMP AUTOSW-AIS FE-AISTL1 Apscnmis Carloss AutoswBslrosync Bits IN-45 Disconnected DBRESTORE-FAIL DCCIN-46 IN-47 IN-48 Lasereol Intrusion INTRUSION-PSWDJRE IN-49 IN-50 PDI IN-51 IN-52 TCP/IP SFTWDOWN-FAILSSM IN-53 TIM IN-54 Wrmrestart Wkswbk WkswprIN-55 IN-56