Error Messages | Cisco Systems ONS 15310-CL, ONS 15310-MA specification

			Chapter 4 Error Messages

Table 4-1		Error Messages (continued)

Error Warning
ID		Error Warning Message	Description

EID-2218		Bandwidth must be between {0} and {1} percent.	The bandwidth must be within the specified
			parameters.

EID-2219		Protection operation failed, XC loopback is applied on	As the protection operation failed, a
		cross-connection.	cross-connect (XC) loopback will be
			applied on cross-connection.

EID-2220		The tunnel status is PARTIAL. CTC will not be able to change	Refer to the error message text.
		it. Please try again later

EID-2221		Cannot find a valid route for the unprotected to {0} upgrade	Refer to the error message text.
		request.

EID-2222		One or more of the following nodes are currently part of a	The nodes, specified by {1}, are already
		4-fiber {0}. Only a single 4-fiber {0} is supported per node.	part of a 4-fiber BLSR/MS-SPRing type
		{1}	(specified by {0}).

EID-2223		Only one circuit can be upgraded at a time.	Refer to the error message text.

EID-2224		This link may not be included as it terminates on the source.	Refer to the error message text.

EID-2225		No valid signal while trying to complete the roll. (0)	Roll can be completed only when a valid
			signal is detected. If not, the roll completion
			may result in an error.

EID-2226		Circuit roll failure.	Refer to the error message text.
		{0}

EID-2320		This VCAT circuit does not support deletion of its member	You can not delete a circuit that is a member
		circuits.	of VCAT circuit.

EID-2321		Error deleting member circuits.	Refer to the error message text.
		{0}

WID-2322		Not all cross-connects from selected circuits could be merged	Refer to the warning message text.
		into the current circuit. They may appear as partial circuits.

EID-2323		Circuit roll failure.	A monitor circuit does not support Bridge
		Bridge and roll is not supported on a monitor circuit.	and Roll.

EID-2324		Circuit upgrade error.	Refer to the error message text.
		{0}

EID-2325		You have failed {0} times to unlock this session. CTC will exit	The maximum amount of attempts to
		after you click OK or close this dialog box.	unlock this session has been reached.

WID-2326		Currently, CTC does not support bridge and roll on circuits that	Refer to the warning message text.
		are entirely created by TL1. To continue with bridge and roll in
		CTC, selected circuits must be upgraded.
		OK to upgrade selected circuits and continue bridge and roll
		operation?

WID-2327		Currently, CTC does not support bridge and roll on circuits that	Refer to the warning message text.
		are partially created by TL1. To continue with bridge and roll
		in CTC, selected circuits must be upgraded.
		OK to upgrade selected circuits and continue bridge and roll
		operation?

	Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-14

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-CL, ONS 15310-MA manual Error Messages

Models: ONS 15310-CL ONS 15310-MA

Chapter 4 Error Messages

Error Warning Message

ONS 15310-CL, ONS 15310-MA specifications