Error Warning Message Description | Cisco Systems ONS 15310-CL

Chapter 4 Error Messages

Table 4-1	Error Messages (continued)

Error Warning
ID	Error Warning Message	Description

EID-5033	Unable to load profile.	CTC detected an error while decoding
	Error decoding characters.	characters and could not load the profile.

EID-5034	Unable to load profile.	CTC detected an error and could not load
	File format error.	the profile.

EID-5035	Unable to load profile.	CTC could not read the file and is therefore
	File read error.	unable to load the profile.

EID-5036	The GNE Host Name {0} is invalid.	The specified host name is invalid. CTC
		could not resolve the host name to any valid
		IP address

EID-5037	Provisionable patchcords cannot be created between	You must create provisionable patchcords
	transponder trunk ports and mux/demux ports on the same	between transponder trunk ports and
	node.	mux/demux ports that are on different
		nodes.

EID-5038	Provisionable patchcords created between transponder trunk	Wavelengths used by provisionable
	ports and mux/demux ports must use the same wavelength:	patchcords for transponser trunk ports and
	{0} is not equal to {1}.	mux/demux ports must be the same.

EID-5039	Provisionable patchcords created between transponder trunk	Transmitter and receiver port wavelengths
	ports and mux/demux ports must use the same wavelength:	are not equal. Provision the receiver and
	{0} is not equal to {1}.	transmitter wavelengths on transmitter and
	Please provision the {2} wavelength on {3}.	receiver ports respectively.

EID-5040	Provisionable patchcords between OC3/OC12 ports and	Refer to the error message text.
	mux/demux ports are not supported.

EID-5041	Provisionable patchcords between non-colored OCn trunk ports	Refer to the error message text.
	and mux/demux ports are not supported.

EID-5042	Provisionable patchcords created between OCn trunk ports and	Wavelengths used by provisionable
	mux/demux ports must use the same wavelength:	patchcords for OC-N trunk ports and
	{0} is not equal to {1}.	mux/demux ports must be the same.

WID-5043	Warning: line card is only provisioned:	Refer to the warning message text.
	wavelength compatibility check is skipped.

EID-5044	Virtual link can be used only for OCH trail circuits.	Refer to the error message text.

EID-5045	Virtual link does not have wavelength available.	Set wavelengths for the virtual link and
		proceed.

WID-5046	Warning: if you select "Use OCHNC Direction" your circuit	Refer to the warning message text.
	will be limited to nodes prior to release 07.00.

EID-5047	Provisionable patchcords between OC3/OC12 ports are not	Refer to the error message text.
	supported.

EID-5048	Provisionable patchcords between non-colored OCn trunk ports	Refer to the error message text.
	are not supported.

EID-5049	Provisionable patchcords between non-colored OCn trunk ports	Refer to the error message text.
	and mux/demux ports are not supported.

EID-5050	Cannot find Element Model:	The specified Element Model cannot be
	{0}	located.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-34

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-CL, ONS 15310-MA manual Error Warning Message Description

Models: ONS 15310-CL ONS 15310-MA

Error Warning Message

Description

ONS 15310-CL, ONS 15310-MA specifications