Error Warning Message Description | Cisco Systems ONS 15310-MA

Chapter 4 Error Messages

Table 4-1	Error Messages (continued)

Error Warning
ID	Error Warning Message	Description

EID-2025	This feature cannot be used. Verify that each of the endpoints	Refer to the error or warning message text.
	of this circuit are running software that supports this feature.	For example, this error is generated from
		the node view Provisioning> WDM-ANS>
		tabs to indicate that the selected ring type is
		not supported by the endpoints of the
		circuit. Another example is the
		Provisioning> VLAN tabs in card view
		(Ethernet card only), where it indicates that
		the back-end spanning tree protocol (STP)
		disabling is not supported.

EID-2026	Unable to apply {0} request. {1}	Error occurred while attempting to switch a
		path protection circuit away from a span.

EID-2027	Error deleting circuit drop.	CTC could not delete the circuit drop.

EID-2028	Error removing circuit node.	CTC could not remove the circuit node.

EID-2029	The requested operation is not supported.	The task you are trying to complete is not
		supported by CTC.

EID-2030	Provisioning error.	There was an error during provisioning.

EID-2031	Error adding node.	There was an error while adding a node.

EID-2032	Unable to rename circuit. {0}	CTC could not rename the circuit.

EID-2033	An error occurred during validation. {0}	There was an internal error while validating
		the user changes after the Apply button was
		pressed. This error can occur in the Edit
		Circuit dialog box or in the BLSR table in
		the shelf view (rare condition).

EID-2034	Unable to add network circuits:	Refer to the error message text.
	{0}

EID-2035	The source and destination nodes are not connected.	Refer to the error message text.

EID-2036	Cannot delete this {0}.	You cannot delete the DCC/GCC link as it
	LAN Access has been disabled on this node and this {0} is	is needed to access the node.
	needed to access the node.

EID-2037	Application error. Cannot find attribute for {0}.	CTC cannot find an attribute for the
		specified item.

EID-2038	Invalid protection operation.	The protection operation you tried to
		execute is invalid.

EID-2040	Please select a node first.	You must select a node before performing
		the task.

EID-2041	No paths are available on this link. Please make another	You must select a link that has paths
	selection.	available.

EID-2042	This span is not selectable. Only the green spans with an arrow	Refer to the error message text.
	may be selected.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-5

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-MA, ONS 15310-CL manual Error Warning Message Description

Models: ONS 15310-CL ONS 15310-MA

Error Warning Message

Description

ONS 15310-CL, ONS 15310-MA specifications