Chapter 4 Error Messages

Table 4-1

 

Error Messages (continued)

 

 

 

Error Warning

 

 

ID

 

Error Warning Message

Description

 

 

 

 

EID-3072

 

Clear Learned Address

Failure attempting to clear the learned MAC

 

 

 

 

address from a specific card or Ether group.

 

 

 

 

EID-3073

 

Clear Selected Rows

Failure attempting to clear the learned MAC

 

 

 

 

address from a specific card or Ether group.

 

 

 

 

EID-3074

 

Clear By {0}

Error encountered trying to clear the

 

 

 

 

learned MAC address from either a VLAN

 

 

 

 

or a port.

 

 

 

 

EID-3075

 

At least one row in param column needs to be selected.

Refer to the error message text.

 

 

 

 

EID-3076

 

CTC lost its connection with this node. The NE Setup Wizard

Refer to the error message text.

 

 

 

will exit.

 

 

 

 

 

EID-3077

 

No optical link selected.

Refer to the error message text.

 

 

 

 

EID-3078

 

Unable to create optical link.

Refer to the error message text.

 

 

 

 

EID-3079

 

Cannot apply defaults to node: {0}

CTC cannot apply the defaults to the

 

 

 

 

specified node.

 

 

 

 

EID-3080

 

Cannot go to the target tab {0}

CTC cannot go to the specified target tab.

 

 

 

 

EID-3081

 

Port type cannot be changed.

Refer to the error message text.

 

 

 

 

EID-3082

 

Cannot modify the {0} extension byte.

You cannot modify the specified extension

 

 

 

 

byte.

 

 

 

 

EID-3084

 

Error encountered while trying to retrieve laser parameters for

There is no card, or there was an internal

 

 

 

{0}

communications error when attempting to

 

 

 

 

get the laser parameters for the card.

 

 

 

 

EID-3085

 

No OSC Terminations selected

Select an OSC termination and proceed.

 

 

 

 

EID-3086

 

One or more Osc terminations could not be created.

Refer to the error message text.

 

 

 

 

EID-3087

 

OSC termination could not be edited.

Refer to the error message text.

 

 

 

 

EID-3088

 

No {0} card to switch.

No card of the specified type to switch.

 

 

 

 

EID-3089

 

Cannot use/change {0} state when {1} is failed or missing.

Cannot use or change the specified state

 

 

 

 

when the card is failed or missing.

 

 

 

 

EID-3090

 

Cannot perform operation as {0} is

Cannot perform operation.

 

 

 

{1}LOCKED_ON/LOCKED_OUT.

 

 

 

 

 

EID-3091

 

Cannot perform the operation as protect is active.

Refer to the error message text.

 

 

 

 

EID-3092

 

Invalid service state. The requested action cannot be applied.

Select another service state and proceed.

 

 

 

 

EID-3093

 

Cannot perform the operation as duplex pair is {0}locked.

Refer to the error message text.

 

 

 

 

EID-3094

 

Cannot perform the operation as no XC redundancy is

You cannot perform the requested operation

 

 

 

available.

on the cross connect card without having a

 

 

 

 

backup cross connect card.

 

 

 

 

EID-3095

 

Deletion failed since the circuit is in use

Refer to the error message text.

 

 

 

 

WID-3096

 

Internal communication error encountered while trying to

Refer to the warning message text.

 

 

 

retrieve laser parameters. This can happen when equipment is

 

 

 

 

not present or when equipment is resetting. Check the

 

 

 

 

equipment state and try to refresh the values again.

 

 

 

 

 

 

 

 

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

 

 

 

 

 

 

 

 

 

4-18

Page 295 Page 297
Page 296
Image 296
Cisco Systems ONS 15310-CL, ONS 15310-MA manual 1LOCKEDON/LOCKEDOUT
Page 295 Page 297

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.
Top Page Image Contents