Error Warning Message Description | Cisco Systems ONS 15310-MA

Chapter 4 Error Messages

Table 4-1	Error Messages (continued)

Error Warning
ID	Error Warning Message	Description

EID-3144	Max number of static routes exceeded.	The number of static routes has exceeded its
		limit.

EID-3145	RIP Metric is not in the range 1-15.	The Routing Information Protocol (RIP)
		metric should be in the range of 1 to 15.

EID-3146	Invalid RIP Metric	Refer to the error message text.

EID-3147	Error creating summary address.	There was an error while creating the
		summary address.

EID-3148	No Layer 2 domain has been provisioned.	You must provision any one of the layer 2
		domain.

EID-3149	Unable to retrieve MAC addresses.	Refer to the error message text.

EID-3150	The target file {0} is not a normal file.	The specified target file is not a normal file.

EID-3151	The target file {0} is not writeable.	The target file is not writeable. Specify
		another file.

EID-3152	Error creating Protection Group	CTC encountered an error creating
		Protection Group.

EID-3153	Cannot delete card, it is in use.	Refer to the error message text.

EID-3154	Cannot {0} card, provisioning error.	CTC cannot perform the task on the card.

EID-3155	Error Building Menu	CTC encountered an error building the
		menu.

EID-3156	Error on building menu (cards not found for {0} group)	CTC encountered an error while building
		the menu, as cards could not be found for
		the specified group).

EID-3157	Unable to set selected model: unexpected model class {0}	CTC encountered an unexpected model
		class while trying to complete the task.

EID-3158	Unable to switch, a similar or higher priority condition exists	Refer to the error message text.
	on peer or far-end card.

EID-31591	Error applying operation.	CTC encountered an error while applying
		this operation.

EID-3160	{0} error encountered.	CTC encountered the specified error.

EID-3161	Ring Upgrade Error	An error was encountered while attempting
		to upgrade the BLSR. Refer to the details
		portion of the error dialog box for more
		information.

EID-3162	This protection operation cannot be set because the protection	Refer to the error message text.
	operation on the other side has been changed but not yet
	applied.

EID-3163	Cannot validate data for row {0}	CTC cannot validate the data for the
		specified row.

EID-3164	New Node ID ({0}) for Ring ID {1} duplicates ID of node {2}	The new specified node ID for the specified
		ring ID is the same as another node ID.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-21

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-MA, ONS 15310-CL manual Error Warning Message Description

Models: ONS 15310-CL ONS 15310-MA

Error Warning Message

Description

ONS 15310-CL, ONS 15310-MA specifications