APC Aborted | Cisco Systems ONS 15310-CL, ONS 15310-MA specs

Chapter 4 Error Messages

Table 4-1	Error Messages (continued)

Error Warning
ID	Error Warning Message	Description

EID-6097	The authorization key does not comply with IOS password	Specify another authorization key.
	restrictions.
	{0}

EID-6098	Default static route is not allowed when default IP Over CLNS	Refer to the error message text.
	tunnel exists

EID-6099	You cannot create a subnet on a disabled router.	Create the subnet on an active router.

WID-6100	Disabling a router that has a provisioned subnet is not	Refer to the warning message text.
	recommended.

EID-6101	The MAT entry already exists.	Refer to the error message text.

WID-6102	The new card has less bandwidth than the current card. Circuits	Refer to the warning message text.
	using VT15 and higher will be deleted.

EID-6103	The TDC entry already exists.	Specify another entry for TARP Data
		Cache.

EID-6104	APC ABORTED.	Automatic Power Control is aborted.

EID-6105	The 'Change Card' command is valid for MRC cards only when	Refer to the error message text.
	port 1 is the sole provisioned port.

EID-6106	To delete all RADIUS server entries, RADIUS authentication	Disable Radius authentication and proceed.
	must be disabled.

EID-6107	The node failed to restart the TELNET service on the selected	Refer to the error message text.
	port. Try using another unreserved port that is not being used
	within the following ranges:
	23, 1001-9999 (with the exception of 1080, 2001-2017, 2361,
	3081-3083, 4001-4017, 4022, 4081, 4083, 5000, 5001, 7200,
	9100, 9300, 9401).

EID-6108	That port is already in use.	Restart a TELNET session.

EID-6109	Error: A section trace is active on the trunk port. The action	Actions such as putting the port in an
	cannot be completed.	incomplete state are not permitted while a
		section trace is active.

EID-6110	Max number of TARP requests reached.	You have exceeded the maximum number
		of TARP requests.

EID-6111	The card in {0} cannot be removed because it is the protected	Refer to the error message text.
	card.

EID-6112	Error adding shelf, {0}	The shelf ID specified is invalid or already
		exists, the equipment does not support
		multishelf, the specified shelf position is
		out of range, or the specified shelf position
		is already in use.

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, R7.0

4-40

ONS 15310-CL, ONS 15310-MA specifications

Cisco Systems has long been a leader in networking and telecommunications technology, and among its impressive lineup of products, the Cisco ONS 15310 series stands out as an essential solution for optical networking. This series includes models such as the ONS 15310-MA, ONS 15310-CL, and ONS 15310-CA, each designed to meet the diverse needs of service providers and enterprises seeking to enhance their optical transport networks.

The Cisco ONS 15310-MA is an advanced multi-service platform designed for metropolitan area networks. It facilitates the seamless transport of data, voice, and video over optical networks. One of its main features is its ability to support a variety of interfaces, including Ethernet, SONET/SDH, and Wavelength Division Multiplexing (WDM), allowing users to integrate multiple services into a single platform. Additionally, the ONS 15310-MA supports advanced traffic management and Quality of Service (QoS) features to prioritize critical applications and ensure consistent performance.

The ONS 15310-CL variant is tailored for more specific applications, providing enhanced capabilities aimed at delivering carrier-grade services. It features a robust architecture that accommodates high-capacity traffic without compromising reliability. This model emphasizes low power consumption and a compact design, making it suitable for deployment in space-constrained environments. The ONS 15310-CL also supports a wide range of optical interfaces, making it highly flexible for various network configurations.

In terms of technologies, the Cisco ONS 15310 series leverages Optical Transport Network (OTN) capabilities, providing high efficiency and greater bandwidth utilization. OTN technology enables efficient error correction and adds resilience to the network through its built-in protection mechanisms. Furthermore, the series supports seamless integration with existing IP/MPLS networks, creating a cohesive infrastructure as organizations evolve their networking requirements.

One of the defining characteristics of the ONS 15310 series is its focus on scalability. Network operators can start with a modest deployment and gradually expand capacity as demand grows. This adaptability is complemented by Cisco's comprehensive management and monitoring tools, providing operators with real-time insights into network performance and facilitating proactive management.

In conclusion, the Cisco ONS 15310-MA and ONS 15310-CL models represent sophisticated solutions for modern optical networks. With their versatile features, advanced technologies, and robust design, they empower service providers and enterprises to build resilient, high-capacity networks that meet the demands of today’s data-driven world.

Cisco Systems ONS 15310-CL, ONS 15310-MA manual APC Aborted

Models: ONS 15310-CL ONS 15310-MA

Error Warning Message

APC ABORTED.

ONS 15310-CL, ONS 15310-MA specifications