Samsung 7100 manual SYSTEM-WIDE Counters, See Description, Counter Default Description

OfficeServ 7100 Call Server Programming Guide

[500] SYSTEM-WIDE COUNTERS

Used to set the values of the system counters. The counters are listed below with a brief de- scription of each.

No	Counter	Default	Description
0	ALARM REM.	5	The number of times that an alarm reminder will
	CNTER		ring a station before cancelling. RANGE = 1-99.
1	AUTO RDL	5	The number of times the system will redial an out-
	COUNTER		side number after the auto redial feature has been
			activated. RANGE = 1-99.
2	DISA CALL CNTER	99	Sets the maximum number of intercom calls that
			can be made after accessing a DISA line.
			RANGE = 1-99.
3	DISA LOCK CNTER	3	Number of attempts the system will allow to incor-
			rectly access a DISA line before locking out the
			DISA line. RANGE = -99
4	NEW CALL	99	Number of times the system will allow a user to
	COUNTER		signal New Call on a Trunk line during one call.
			RANGE = 1-99.
5	UCDS VISUAL	0	Used to set the Visual alarm threshold. It is trig-
	ALARM		gered when the number of calls waiting to be an-
			swered in the UCD group reaches this value.
			RANGE = 0-25.
6	UCDS AUDIO ALARM	0	Used to set the Audio alarm threshold. It is trig-
			gered when the number of calls waiting to be an-
			swered in the UCD group reaches this value.
			RANGE = 0-25.
7	UCD CS LEVEL 1	0	Provides call wait indication level 1 if number of
			calls waiting to be answered in UCD group reaches
			this value. RANGE = 0-25.
8	UCD CS LEVEL 2	0	Provides call wait indication level 2 if number of
			calls waiting to be answered in UCD group reaches
			this value. RANGE = 0-25.

DEFAULT DATA

SEE DESCRIPTION

Samsung Business Communications 2-139