Samsung 7100 manual Dial Numbering Plan, Type of Dial No Description

CHAPTER 2. Ошибка! Стиль не определен.

[724] DIAL NUMBERING PLAN

This MMC allows the technician to change directory numbers for stations, trunks, station groups, trunk groups and feature access codes. The system can be pre-programmed with default 3- or 4-digit numbering for stations, station groups and trunk numbers depending on the position of the DIP switches on the MCP card. There is an error message provided to prevent the accidental duplication of a directory number or feature access code.

No	Type of Dial No	Description
00	STN DIAL NO.	This is where station directory numbers are changed or assigned.
		Default: 201-2xx, 3xx(last 319) or 2001-2xxx
01	TRK DIAL NO.	This is where trunk directory numbers are changed or assigned.
		Default: 701-7xx or 7001-7xxx
02	AA/VD DIAL NO	Not used
03	MISC DIAL NO.	This is where directory numbers for relays, MOH ports and the
		alarm sensor are changed or assigned.
		Default: MISC01:371
		MISC02: 361
		MISC03:362
		MISC04:3999
04	STNG DIAL	This is where station group numbers are changed or assigned.
	NUMBER	Default: 500-5xx or 5001-5xxx
05	TRKG DIAL	This is where trunk group numbers are changed or assigned.
	NUMBER	Default: The first is 9 or 0, 800-809
06	FEAT DIAL NUMBER	This is where feature access codes are changed or assigned. Dial-
		ling codes are entered via the dial keypad by pressing a number
		the required number of times to select the feature. For example, for
		OHVA, the number 6 would be pressed three times.
		Please remember that this program is system-wide.
07	S0 STN DIAL NO.	This is where directory numbers for BRI station ports are changed
		or assigned.
		Default: 8701-8708
09	NTWK LCR DIAL NO	This is where additional LCR access codes are entered if two or
		more OfficeServ 7100 systems are networked together.
		Default: NONE

2-230 Samsung Business Communications