Samsung 7100 manual TX Level and Gain, SVMi

OfficeServ 7100 Call Server Programming Guide

[805] TX LEVEL AND GAIN

Allows the system administrator to set the base level of TX volume on phones. There are eight levels that can be controlled by the Volume buttons on phones, and 10 controllable levels in the system. This MMC allows the system administrator to classify any desired eight levels within 11.

No	Option							Description
0	TX LEVEL CONTROL	Adjusts the transmitting sensitivity(max.: 9) Default values are:
		INDEX:		0	1	2	3	4	5	6	7
		LEVEL:		0	1	2	4	3	5	6	7
1	MISC TSW GAIN	Adjusts the level of the internal music source of the MCP card or
		the external music source of the MIS card(0~7, higher numbers
		mean lower levels). Default value is 0.
2	TSW GAIN	Adjusts the tone sensitivity. There are eight types of matrix connec-
	CONTROL	tions of the T-Switch that adjust the tone sensitivity(0-7, below).
		Connection between Trunk lines are only applicable when set as 0
		in MMC 421.
		0	DGP	DLI phone
		1	SLT	SLI phone

2ATRK Analogue trunk

3DTRK Digital trunk

4DECT DECT terminal

5VOIP MGI port or IP-based phone

6SVMi SVMi port

7WLAN WIP port

When changing the MMC [805]

‘MMC [805] TX LEVEL AND GAIN’ should not be changed from the default levels without the assistance of the local SAMSUNG distributor.

DEFAULT DATA

TX	RX		DGP		SLT		ATRK		DTRK		DECT		VOIP		SVMi		WLAN
DGP Æ		0.0		0.0		0.0		0.0		-6.0		0.0		-6.0		+1.9
SLT Æ		0.0		-2.5		0.0		-2.5		-6.0		0.0		-6.0		+1.9
ATRK Æ		0.0		0.0		+1.9		-6.0		-6.0		0.0		-6.0		+1.9
DTRK Æ		0.0		-2.5		+1.9		0.0		-6.0		0.0		-6.0		0.0
DECT Æ		0.0		0.0		0.0		+1.9		-6.0		0.0		-6.0		0.0
VOIP Æ		0.0		0.0		0.0		0.0		-6.0		0.0		-6.0		0.0
SVMi Æ		0.0		0.0		0.0		0.0		-6.0		0.0		-6.0		0.0
WLAN Æ		-6.0		-2.5		-6.0		0.0		0.0		0.0		0.0		+1.9

Samsung Business Communications 2-269