Samsung 7100 manual Customer ON/OFF PER Station

OfficeServ 7100 Call Server Programming Guide

[300] CUSTOMER ON/OFF PER STATION

Allows the following features to be enabled/disabled on a per-station basis.

No	Option	Default	Description
00	ACCESS DIAL	ON	Determines whether a user can select a trunk or trunk
			group by dialling its Directory Number(DN). This selec-
			tion should be turned off when using LCR.
01	MICROPHONE	ON	Allows phones to be used in speakerphone mode.
02	OFF-HOOK RING	ON	Will allow a short burst of ring tone to indicate another call.
03	SMDR PRINT	ON	When the station is set for no Trunk Line calls to and
			from this station, the station will not print on SMDR.
			This includes transferred calls or calls picked up from
			hold or park.
04	TGR ADV.TONE	ON	When this feature is set to ON, a warning tone will be
			heard each time LCR advances to the next route.
05	VMAA FORWARD	ON	This feature selects whether Trunk Line calls can be
			forwarded to voice mail: ON, permits forward to voice
			mail; OFF, no forward to voice mail.
07	NGT PASSCODE	ON	When ON, the steps verifying the ring plan passcode
			will be added in Ring Plan change.
08	INTRCOM SMDR	OFF	When the station is set to OFF, the station will not print
			intercom calls on SMDR.
09	FWD DELAY USE	OFF	When ON, calls will overflow to the Forward No Answer
			destination when the Forward No Answer timer expires
			even when the Forward No Answer feature is not acti-
			vated at the called party extension.
11	FORWARD OVRD	OFF	When set to ON and the station calls another station
			which has forwarding set, the call will not forward.
12	RECL TO OPER	OFF	When the station is set to ON, if the station transfers a
			call and the destination doesn’t answer, the call will
			recall to the operator instead of the station.
13	SLT LP OPEN	OFF	When ON, SLI port receives real disconnect signal in-
			stead of busy or error tone.(VMAA or DATA ports al-
			ways receive real disconnect signal.)
15	CID TO SLT	OFF	When a MIS card is installed and this option is set to
			ON, the system will provide the CID signal to SLTs.
22	NO RCL FLASH	OFF	When the hook switch is flashed or the flash key is
			pressed, a recall signal will not be sent to the system.
23	RBK STN NAME	OFF	When ringback, station name can be displayed, instead
			of “Ringing”

Samsung Business Communications 2-71