OfficeServ 7100 Call Server Programming Guide
Samsung Business Communications 2-279
[815] CUSTOMER DATABASE COPY This enables the on-board customer database(SRAM) to be copied to the MC Data-
base(MCDB) and also allows the MCDB database to be copied to the SRAM. A daily save
can be programmed to automatically save the SRAM to the MCDB. This ensures that an
up-to-date database is always available in case of a catastrophic failure. A daily save time
of 00:00 means that no daily save is performed.
It is recommended that the MCDB is cleared before the SRAM is copied to it. When the
SRAM is copied to the MCDB there is no interruption in service. If the MCDB is copied to
the SRAM, the system will reset to accept the new data.
MCDB(Mc card database)
Option Description
S:mm/dd/yy hh:mm Indicates the time the database was saved to the MCDB.
CLEAR MCDB Clear MCDB.
COPY TO SRAM Copy MCDB to SRAM.
SRAM(MCP on-board database)
Option Description
S:mm/dd/yy hh:mm Indicates the time the SRAM was last saved.
COPY TO MCDB Copy SRAM to MCDB.
DAILY SAVE hh:mm The time the SRAM will be saved to the MCDB.
A MC Card of 256 MB
A MC Card of 256 MB must be installed in order to copy the on board data-
base(SRAM) on to the MC card (MCDB).
DEFAULT DATA
DAILY SAVE 00:00(no daily save)
ACTION DISPLAY
1) Press Transfer button and enter 815.
Display shows: CUST DBASE:MCDB
S:12/01/01 00:00
If MC card is in use, the display shows: CUST DBASE:MCDB
MMC IS BUSY