Connecting with a scart cable
Have the following cables ready:
an aerial cable (1, supplied), a mains cable (2, supplied), a scart cable (3).
1Remove the aerial cable plug from your TV set. Insert it into the socket m at the back of the video recorder.
2Insert one end of the supplied aerial cable into the socket n at the back of the video recorder and the other end into the aerial input socket at the back of the TV set.
3Plug one end of a scart cable into the scart socket EXT.1 AV 1 at the back of the video recorder and the other end into the suitable scart socket on your TV set (see your TV's operating instructions).
My TV set has several scart sockets. Which one should I use?
Select that scart socket which is suited for the video output as well as for the video input.
My TV offers me a selection menu for the scart socket.
Select 'TV' as a connection source of this scart socket.
4Switch on the TV set.
5Insert one end of the supplied mains cable into the mains socket
qat the back of the video recorder and the other end into the wall socket.
My screen is empty
Many TV sets are switched to the programme number for the scart socket by way of a control signal sent through the scart cable.
If the TV set does not automatically switch to the scart socket programme number, manually change to the corresponding programme number on your TV set (see your TV's operating instructions).
Then, read the paragraph 'Initial installation' in the chapter 'Installing your video recorder'.
8 | Connecting the video recorder |
|
