24
Recording with automatic switch-off(OTR One-Touch-Recording)1Insert a cassette.
2Use P;q or P=r to select the programme number you want to
record.
3Press RECORD non the remote control.
4Each time you press RECORD nyou will add 30 minutes to the
recording time.
How can I clear the recording time just setted?
To delete an entry, press CLEAR (CL)while the display shows the
recording time.
Preventing accidental erasing of cassettesAll cassettes (except for rental and store cassettes) have a security tab on the back of the
cassette (see arrow).
To prevent recording over important recordings (erasing), you can remove this security tab or
slide it to the left.
If you later decide to record on a protected cassette, simply cover the hole with adhesive tape
or slide the tab to the right.
Lining up recordings (assemble cut)When you add a further recording to a cassette, which already has a recording on it, a short
blank (flicker) can appear between the old and the new recording or the picture itself can flicker.
To help reduce these from occurring, proceed as follows:
1Find the tape position of the old recording where you want to insert
the new recording.
2Look at the last minute of the old recording (playback).
3Press STOP hon the remote control at the tape position where the
new recording is to go. 9' will appear on the display.
4Now start recording as usual by pressing RECORD non the remote
control.
5Stop recording with STOP h.