25
HProgramming a recording (TIMER)
General information
Use programmed recording to automatically start and stop a recording at a later date. The video
recorder will switch to the right programme number and begin recording at the correct time.
With this video recorder, you can pre-programme up to six recordings within a period of one
month.
To make a programmed recording, your video recorder needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
This information is saved in a 'TIMER block'.
Programme recordings
1Press TIMER kon the remote control.
An empty TIMER block will appear in the display.
--:-- a'CLK' will briefly appear in the video recorder display then 'CLK'
will flash
bThe internal clock of the video recorder must be reset. Please read the
section 'Setting the time and date' (starting at step 3) in chapter
'Installing your video recorder'.
01
2Press TIMER k.
The video recorder display will read, for instance, 'DATE 01'.
If required, change the date of the recording with P;q ,P=r or
the number buttons 0-9on the remote control.
01
3Press TIMER k.
The video recorder display will read, for instance, 'PROG. 01'.
If required, use P;q ,P=r or the number buttons 0-9 on the
remote control to change the programme number of the TV channel
from which you want to record.
20:00
4Press TIMER k. The video recorder display will read, for instance,
'START 20:00'.
If required, change the start time of the recording with P;q ,
P=r or the number buttons 0-9on the remote control.
ENGLISH
Programming a recording (TIMER)